Need help?Do you have a question about the Behringer Eurodesk MX2442A and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 24 |
| Inputs - Line | 24 |
| Aux Sends | 6 |
| Phantom Power | Yes |
| Group Outputs | 4 |
| Main Outputs | 2 |
| Effects | No |
| Faders | 24 |
| Returns | 4 |
| Dimensions | 110 mm x 960 mm x 430 mm |
| Weight | 13.5 kg |
| EQ Bands | 3-band |
Comprehensive safety instructions covering water, ventilation, heat, power, grounding, cleaning, and servicing to prevent hazards.
Details the 24-channel, 4-bus recording and live-mixing console capabilities.
Highlights discrete mic preamps with +48V phantom power and advanced EQ features.
Covers multi-functional aux returns, stereo EQ, and comprehensive I/O options.
Guides on adjusting the GAIN control and using SOLO/PFL for accurate input level monitoring and setup.
Describes the 3-band semi-parametric EQ and switchable low-cut filter for sonic shaping.
Covers setting input levels for stereo channels, similar to mono channels.
Details the four-band fixed-frequency EQ specifically for stereo input channels.
Explains balanced/unbalanced connections for various inputs and outputs.
Guides on choosing mic vs. line inputs and handling phantom power with microphones.
Steps to set gain minimum, EQ flat, and prepare for initial gain adjustment.
Process for setting input gain, matching levels, and checking signals with PFL.
Recommends setting controls to defaults before or after sessions for consistency.
Explains using PFL/SOLO for levels, driving FX, and avoiding distortion.
To Next Page