Behringer X AIR X18 - DIGITAL IPAD;TABLET MIXER X18;XR18 Network Connection; Step 3: Network Connection

(EN) Step 3: Network
Connection
DIGITAL iPAD/TABLET MIXER X18/XR18 Network Connection
Getting Started
First Wi remote connection to your
X AIR mixer
1. Download and install the remote
control app for your device.
• Android smartphones/tablets:
X AIR Android from the Google
Play* store
• Apple iPad: X AIR for iPad from
the Apple*Appstore
• PC: X AIR EDIT for Windows, Mac
or Linux from behringer.com
2. Set the REMOTE switch on your X AIR
mixer to ACCESS POINT mode and
power on the mixer.
3. Reset your X AIR mixer’s network
settings to default values by holding
the RESET button for 2seconds. This
is located in the small hole above the
Wi icon and requires a paper clip or
similar tool to reach.
4. Switch your remote control device on
and open the network settings.
Android smartphones/tablets:
1. Start the Settings/Wireless&
Networks dialog on your
Androidsystem.
2. Switch ’Wi ’ on.
3. Click on ’Wi ’ to select a network.
From the list of networks, select
your X AIR mixer’s name, e.g. “XR18-
19-1B-07”. After a few seconds, the
status should change to ’Connected’.
4. Open your X AIR for Android app and
it will show similar information:
• Mix Access = All
• IP Address = 192.168.1.1
• Wi Lock = None
• Wi connected to XR18-19-1B-07
5. You may choose to lock the
connection to this speci c Wi
network if you want to ensure that
your device cannot automatically
connect to another network while
you are controlling yourmixer.
6. Click on ’Connect’ and tap on the
mixer’s name in order to connect
the app with your mixer. Note - if a
warning pops up telling you that the
mixer  rmware is not supported,
it is recommended to update the
 rmware to the latest version
(seethe X18 pages on behringer.com
for details). You can, however,
choose to connect anyway.
7. Once the app is connected to your
mixer, allparameters will be loaded
automatically. Enjoyexploring
all mixing functions of your XAIR
mixerremotely!
Apple iPad:
1. Start the Settings/Wi dialog on
your iOS.
2. Switch ’Wi ’ on.
3. Select your X AIR mixer’s name
from the list of networks, e.g.
“XR18-19-1B-07”. After a couple of
seconds, the status should change
to ’Connected’, indicated by a
checkmark.
4. Open your X AIR for iPad app and
it will show any X AIR mixers
(’Devices’) found in that network,
with their IP address, which in this
case is192.168.1.1.
5. Tap on the mixer’s icon to connect
the app with your mixer.
Note - if a warning pops up telling
you that the mixer  rmware is not
supported, it is recommended to
update the  rmware to the latest
version (see the X18 pages on
behringer.com for details). You
can, however, choose to connect
anyway.
6. Once the app is connected to your
mixer, allparameters will be loaded
automatically. Enjoyexploring
all mixing functions of your XAIR
mixerremotely!
PC: X AIR EDIT for Windows, Mac or Linux
1. Open the Wireless Network
Connections dialog on your
operating system.
2. Make sure the ’WLAN’ or ’Wi ’
adapter is switched on.
3. View the list of wireless networks
and select your X AIR mixer’s name,
e.g. “XR18-19-1B-07”. Aftera
couple of seconds, the status should
change to ’Connected’, indicated by
a checkmark.
4. Open your X AIR Editor for Win/Mac/
Linux and click on ’Setup’. The list
will show any XAIR mixers found
in that network, withtheir name
and IP address, which in this case
is19 2.16 8.1.1.
5. Click on your mixer’s name,
e.g.“XR18-19-1B-07”, and con rm
to synchronize from mixer to PC in
order to connect the app with your
mixer. Ifa warning pops up telling
you that the mixer  rmware is
not supported, it is recommended
to update the  rmware to the
latest version (see the X18 pages
on behringer.com for details).
Youcan, however, choose to
connectanyway.
6. Once the app is connected to
your mixer, allparameters will
be transferred automatically.
Enjoyexploring all mixing functions
of your XAIR mixer remotely!
22 X AIR X18/XR18 23 Quick Start Guide