7Quick Start Guide
4. Connector Plate
• 2x RJ45 connectors with integrated LEDs
• ACT/LINK LED (green) lights green when valid IP network
connection exists.
• 1 G LED (amber) lights when used in 1 GBit/s network.
• 2x small handles (St) for removing the expansion card from
the slot
• 2x outer screws for xing the card in the slot (M3 x 6 size).
• 3x countersunk screws xing the PCBA to the bracket.
Do not remove these!
To Next Page
Loading...
