Behringer Xenyx QX1202 - Page 14

Frequency response (-3 dB) <10 Hz – 200 kHz (-3 dB)
Gain range +10 dB to +60 dB
Max. input level +10.8 dBu @ +10 dB Gain
Impedance 1.9 kΩ balanced
Signal-to-noise ratio 107 dB / 110 dB A-weighted, +22 dB Gain
Distortion (THD + N) 0.006% / 0.005% A-weighted
Line Input
Type ¼” TRS connector, balanced
Impedance 20 kΩ balanced, 10 kΩ unbalanced
Gain range -10 dB to +40 dB
Max. input level +21 dBu @ 0 dB Gain
Frequency Response (Mic In → Main Out)
<10 Hz – 137 kHz ±3 dB
Stereo Inputs
Type 2 x ¼” TRS connector, balanced
Impedance
20 kΩ balanced, 10 kΩ unbalanced (+4 dBu operating level) 20
kΩ balanced, 5 kΩ unbalanced (-10 dBV)