Need help?Do you have a question about the Beko Arcelik BLG15 C7S and is the answer not in the manual?
Overview of power, display, and vector motor boards for machine control.
Function and types of water inlet valves, including dual and triple valve configurations.
How the analog water level sensor determines water level via frequency modulation.
Details on brushless motors, stator, rotor, and control via vector board.
Function of the heater for water heating, including thermofuse and safety water level.
Role of the NTC sensor in measuring water temperature and controlling the heater.
Description of the synchronous motor drain pump and its impedance protection.
Function of the solenoid door safety lock for program security.
Step-by-step guide to connect the washing machine to the HomeWhiz application.
Managing multiple smart devices and accounts for HomeWhiz connectivity.
Utilizing remote control via Bluetooth, including connection status indicators.
Resolving common issues with HomeWhiz connectivity and remote control.
Explanation of how steam is generated during specific wash programs.
Procedure to activate the machine's service or test mode.
Performing a test to verify Bluetooth connection functionality.
Method to check and display the current software version.
Testing all panel LEDs, icons, and LCD segments for functionality.
Testing motor operation in clockwise and counter-clockwise directions at specified RPM.
Checks for NTC sensor, mains voltage input, and maximum spin speed.
Verifying the operation of the drying module heater.
Testing prewash, main wash, and condenser valves and their flow meters.
Verifying the softener compartment and detergent box siphon function.
Procedure to test the activation and function of the hot water valve.
Testing heater activation and water level sensor accuracy.
Verifying the machine's Bluetooth connection status.
Testing the drain pump and viewing errors from service mode.
Displays the number of successful service mode completions without errors.
Details on the specific tool for shock absorber pin removal and attachment.
Step-by-step guide for fitting and removing the washing machine's upper table.
Procedures for installing and removing the front panel assembly.
Steps for installing and removing the detergent drawer unit.
Guide for fitting and removing the electronic display board assembly.
Step-by-step instructions for installing and removing the main power board.
Instructions for attaching and detaching the main door group components.
Process for carefully removing the washing machine's exterior door.
Procedures for removing the door handle and the lock hook mechanism.
Steps for separating the glass and reassembling the exterior door.
Guide on how to install and remove the pump access cover.
Instructions for fitting and removing the washing machine's front wall panel.
Procedures for correct alignment of plastic parts during installation.
Detailed steps for removing detergent box via upper table/panel disassembly.
Steps for installing and removing the dual water inlet valve.
Procedures for fitting and removing the water level sensor.
Steps for installing and removing the main power cable.
Guide for fitting and removing the EMI filter.
Procedures for installing and removing the main washing motor.
Steps for disassembling and assembling the Atlas vector motor control card.
Instructions for correctly installing the Poly V drive belt.
Procedures for installing and removing shock absorbers and their pins.
Steps for fitting and removing upper and lower counterweights.
Procedures for installing and removing the drain pump assembly.
Steps for fitting and removing the water inlet hose.
Procedures for installing and removing the water drain hose.
To Next Page
General