What to do if Beko WRYS 51022 C programme cannot be started?
If the Beko Washer programme cannot be started or selected, it may have switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.). To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will then be cancelled.
Why is my Beko WRYS 51022 C Washer vibrating and making noise?
Your Beko Washer may be vibrating or making noise due to several reasons. The machine might be unbalanced, so adjust the feet to level it. A hard substance may have entered the pump filter; clean the pump filter. Ensure the transportation safety bolts are removed. The laundry quantity might be too little, so add more laundry. The machine might be overloaded, so take some laundry out or distribute the load evenly. Also, ensure the machine isn't leaning on anything.
What to do if laundry remains wet after Beko Washer programme?
If your laundry remains wet after the Beko Washer programme, it could be due to excessive foam from using too much detergent, which activates the automatic foam absorption system. Use the recommended amount of detergent. Also, the machine might not switch to the spinning step if the laundry is not evenly distributed. In this case, rearrange the laundry and re-spin.
Why is foam overflowing from the detergent drawer of my Beko WRYS 51022 C Washer?
Foam might be overflowing from the detergent drawer of your Beko Washer because too much detergent is being used. To resolve this, mix 1 tablespoonful of softener with ½ liter of water and pour it into the main wash compartment of the detergent drawer. Also, ensure you are using a detergent suitable for the selected program and the indicated maximum load. If using additional chemicals like stain removers or bleach, reduce the amount of detergent used.
Why does programme time not countdown on my Beko WRYS 51022 C?
The programme time on your Beko Washer may not countdown because the timer may stop during water intake until the machine takes in an adequate amount of water, or during the heating step until the machine reaches the selected temperature. Also, the timer may stop during the spinning step because the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. If the laundry is not evenly distributed, rearrange it and re-spin.
What to do if my Beko WRYS 51022 C Washer stopped shortly after the programme started?
If your Beko Washer stopped shortly after the programme started, it might have stopped temporarily due to low voltage. It will resume running when the voltage restores to the normal level.
General safety rules for operating the washing machine, covering usage, maintenance, and potential hazards.
Defines the appliance's purpose for domestic laundry washing and rinsing.
Safety precautions to protect children from appliance-related risks.
Details and warnings for connecting the appliance to the electrical supply.
Guidance on correctly connecting the water inlet hoses.
Instructions for properly connecting the drain hose to a waste outlet.
Criteria for selecting a suitable and safe location for the washing machine.
Instructions for adding detergents and fabric softeners to the correct compartments.
Overview of the control panel, buttons, and display functions.
Description of the standard washing programmes available for different fabric types.
How to use and select additional functions like Prewash and Quick Wash.
How to choose the right programme and optimize washing efficiency.
Step-by-step guide for cleaning the detergent dispenser.
Detailed instructions for emptying residual water and cleaning the pump filter.
Instructions for cleaning the drum and the door seal area.
Solutions for issues preventing programme initiation or selection.
To Next Page
General