What to do if laundry remains wet after a Beko Washer program?
If your laundry remains wet after the program ends, excessive foam might have occurred, activating the automatic foam absorption system due to too much detergent. Try using the recommended amount of detergent. Also, the machine may not switch to the spinning step if the laundry isn't evenly distributed in the drum. In this case, rearrange the laundry and re-spin it.
Why did my Beko WRE 6411 BWW stop shortly after the program started?
Your Beko Washer might have stopped temporarily due to low voltage. It will resume running when the voltage restores to the normal level.
Why is my Beko Washer vibrating and making noise?
Your Beko Washer might be vibrating or making noise due to several reasons. The machine might be standing unbalanced; in this case, adjust the feet to level the machine. A hard substance might have entered into the pump filter, so you should clean the pump filter. Ensure that the transportation safety bolts are removed. Also, the laundry quantity in the machine might be too little or too much. Add more laundry or take some out to balance the load. Lastly, ensure the machine isn't leaning on anything.
How to stop foam overflowing from the detergent drawer of my Beko WRE 6411 BWW Washer?
If foam is overflowing from the detergent drawer of your Beko Washer, it's likely that too much detergent was used. To resolve this, mix 1 tablespoon of softener with ½ liter of water and pour the mixture into the main wash compartment of the detergent drawer. Ensure you are using detergent suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. If using additional chemicals like stain removers or bleach, reduce the amount of detergent used.
Why does the program time not countdown on my Beko WRE 6411 BWW Washer?
The program time on your Beko Washer may not countdown for a few reasons. The timer may stop during water intake until the machine takes in an adequate amount of water to avoid poor washing results. Also, the timer may stop during the heating step, waiting until the machine reaches the selected temperature. Finally, the timer may stop during the spinning step because the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. In this case, laundry should be rearranged and re-spun.
General| Type | Freestanding |
|---|---|
| Capacity | 6 kg |
| Spin Speed | 1400 rpm |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 84 cm x 60 cm x 44 cm |
| Weight | 55 kg |
| Noise Level (Spinning) | 76 dB |
| Number of Programs | 15 |
Safety instructions for product usage, children's safety, and general precautions to avoid damage or injury.
Specifies the product's designed purpose and limitations for domestic use only.
Precautions regarding packaging materials and electrical products to ensure children's safety.
Guidelines for selecting a suitable location for the washing machine, considering floor stability and environment.
Steps to remove packaging reinforcement and transportation safety bolts before operation.
Instructions for connecting water supply and drain hoses, including pressure and height requirements.
Procedure for leveling the machine by adjusting feet and connecting to the power supply.
Guidance on sorting laundry by fabric type, color, and soiling, plus preparation steps.
Recommendations for using the washing machine efficiently to save energy and water.
Instructions for first-time use and determining correct laundry load capacity.
Step-by-step guide for loading laundry and using detergent and softener in the correct compartments.
Specific instructions for using fabric softener and liquid detergents, including compartment placement.
Table detailing recommended detergent types and temperatures for soiling levels and fabric colors.
Instructions for using gel/tablet detergents, starch, and bleaching agents safely.
Explanation of the washing machine's control panel, buttons, and indicator lights.
Steps to prepare the machine and select the appropriate wash programme for efficient washing.
Table detailing wash programmes, their specifications, and estimated consumption data.
Description of primary wash programmes and their intended uses for different fabric types.
Explanation of additional programmes for special cases and specific functions like Rinse and Spin+Pump.
How to adjust spin speed, including options like Rinse Hold and No Spin for delicate items.
Instructions for using the Delayed Start function and starting the selected wash programme.
How to activate and deactivate the Child Lock feature to prevent unauthorized operation.
How to monitor programme progress and understand the loading door lock system's behavior.
How to pause the machine, add or remove laundry, and change settings during an ongoing cycle.
Procedure for cancelling a running programme and starting a new one.
What happens when a programme ends and how the machine switches to energy saving mode.
Instructions for cleaning the detergent drawer and its siphon to prevent buildup and ensure proper function.
How to clean the drum, door seal, body, and control panel to maintain hygiene and appearance.
Steps to clean filters at the water intake valves and hoses to ensure proper water flow.
How to drain residual water and clean the pump filter to prevent clogging and damage.
Comprehensive instructions for cleaning the pump filter and draining water, with or without an emergency hose.
Detailed technical data and specifications for the washing machine model as per EU regulations.
Solutions for programme start failures, machine stopping mid-cycle, and timer countdown problems.
Troubleshooting vibration, noise, residual water, and foam overflow from the detergent drawer.
Addressing issues where laundry remains wet at the end of the programme due to spinning problems.
To Next Page
