What to do if the Beko B50 A 800 B remote control does not work?
If your Beko TV remote control isn't working, first, make sure you're pointing it directly at the TV. Then, check the batteries and replace them if needed. If it still doesn't work, try turning off the TV using the power button or unplugging it for about 2 minutes before turning it back on.
How to fix a Beko B50 A 800 B screen with snow but no station?
If your Beko TV screen shows snow but no station, check if the antenna cable is properly connected. If it is, try starting a channel search. Also, adjust the brightness, contrast, or color settings. Test with a different station to rule out station problems. Finally, consider that interference from other devices might be the cause, so try changing the position of the device.
Why is my Beko B50 A 800 B showing ghosting or reflection?
Ghosting or reflection on your Beko TV can be due to several reasons. Try automatic or manual channel setting/fine tuning. Have your antenna cable or system checked. Adjust the color intensity, as it might be at maximum. If available, select the correct color standard in the TV settings. Test with a different station to see if the problem is with the broadcast. Also, ensure the volume isn't set to minimum.
What to do if teletext is missing or faulty on my Beko B50 A 800 B?
If teletext is missing or faulty on your Beko TV, test with a different station to rule out a problem with the broadcast. It's possible the television station doesn't offer teletext or there's an issue with the antenna system, so test another channel and check for fine tuning and ghosts. A weak station signal could also be the cause, so check the antenna system.
Warns about the dangers of TV sets falling and provides precautions.
Explains how to receive digital TV channels via different antenna types.
Guides on connecting the antenna and power cable to the TV.
Details the primary functions of the remote control.
Explains all functions of the remote control, including color buttons.
Guides on connecting the TV to a wired or wireless network.
Step-by-step guide for the initial setup process of the TV.
Detailed steps for wired network connection.
Adjusts various picture parameters for optimal display.
Adjusts various audio parameters for optimal sound.
How to turn the TV on, off, and switch to standby.
How to access and use HbbTV services.
Details about recording and playing TV programs via USB.
Guides on connecting external storage devices like USB drives.
Configuration options for USB recording.
Overview of available internet applications.
How to use the web browser to navigate the internet.
How to change the TV's menu language.
How to block specific TV channels using a PIN.
Restores TV to factory defaults, erasing settings.
Controls connected HDMI devices with the TV remote.
Guides on establishing network connections.
Connecting the TV to a network using a LAN cable.
Configuration options for wired network setup.
Auto-scan for digital satellite channels.
Manual search for digital satellite channels.
To Next Page
General
