This document is a user manual for a Beko Frost Free Combi Built-In Fridge / Freezer, model BCFD4V73. It provides instructions for safe operation, installation, usage, and maintenance of the appliance.
Function Description
The Beko BCFD4V73 is a combined refrigerator and freezer unit designed for storing and freezing edible foodstuff. It features a frost-free system, eliminating the need for manual defrosting in both compartments. The appliance is built-in, meaning it's designed to be integrated into kitchen cabinetry. A key feature is its "Freezer Guard technology," which allows the freezer compartment to operate effectively even in ambient temperatures as low as -15°C, preventing frozen food from thawing. However, in such low ambient conditions, the fridge compartment contents are likely to freeze. The appliance includes a control panel for temperature adjustment and various functions.
Important Technical Specifications
- Model Identifier: BCFD4V73
- Refrigerant: R600a (environmentally friendly, flammable under certain conditions)
- Insulation: Cyclopentane
- Ambient Temperature Range: Designed to operate in ambient temperatures up to 38°C (100°F). Freezer Guard technology ensures operation down to -15°C.
- Electrical Requirements: Operates on mains supply. The voltage and frequency shown on the rating plate must match the electricity supply. It requires a 13A fuse (ASTABEAB approved BS 1362).
- Installation Space: The room where the appliance is installed must not be smaller than 10 cubic metres.
- Side Clearances (if installed near heat sources):
- From Cookers: 50 mm (2")
- From Radiators: 300 mm (12")
- From Freezers: 25 mm (1")
- Power Failure Storage Time: Frozen food should not be affected if a power failure lasts for less than 13 hours.
- Lighting Source: Equipped with a lighting source of "G" energy class, which should only be replaced by professional repairers. The lamps are designed to withstand extreme physical conditions, including temperatures below -20°C, and are not suitable for household room illumination.
Usage Features
- Control Panel:
- On/Off Function: Press for 3 seconds to turn the fridge on or off.
- Fridge Set Function: Adjusts the fridge compartment temperature from warmest to coldest settings.
- Fridge Compartment Temperature Setting Indicator: Displays the current temperature setting for the fridge.
- High Temperature Error / Warning Indicator: Illuminates during high temperature failures and error warnings.
- Quick Fridge Function: Activates a rapid cooling mode for the fridge compartment, useful for quickly cooling large amounts of fresh food. It automatically cancels after 8 hours or when the desired temperature is reached. This function is not recalled after a power failure.
- Alarm Off: Silences the door open alarm (activated after 2 minutes) or sensor failure alarm.
- Internal Layout: Includes cabinet shelves, door shelves, a wine rack, an egg tray, a salad crisper, and frozen food storage drawers. The freezer also has a fast freeze compartment.
- HarvestFresh Technology: Crispers illuminated with blue, green, and red lights, simulating a day cycle, to preserve the vitamin content (A and C) of fruits and vegetables for longer. If the door is opened during the dark period, the lights will automatically illuminate for convenience.
- Food Storage Guidelines:
- Fridge compartment for short-term storage of fresh food and drinks.
- Freezer compartment is **** rated for freezing and storage of pre-frozen food.
- Cooked dishes should be stored in airtight containers.
- Fresh produce should be cleaned and stored in crisper bins.
- Raw meat should be wrapped and stored on the lowest shelf, separate from cooked food.
- Hot food and beverages must cool before being placed in the fridge.
- High proof alcohol should be stored upright in sealed containers.
- Fizzy drinks and flavoured water ices should not be frozen.
- Some fruits and vegetables (pineapples, melons, cucumbers, tomatoes) should be wrapped in polythene bags if kept near 0°C.
- Maximum frozen food storage volume is achieved without using the upper shelf cover in the freezer.
- Making Ice Cubes: Fill ice cube trays 3/4 full with water. Use a spoon handle to loosen frozen trays; avoid sharp objects.
Maintenance Features
- Defrosting (Fridge Compartment): Automatic defrosting. Defrost water drains via a collection container at the back of the appliance. A plastic plunger is provided to clear the drain tube if blocked. Flushing with warm tap water (approx. 100ml) is recommended to ensure drainage.
- Defrosting (Freezer Compartment): Automatic frost-free system. A freezer fan circulates cold air.
- Cleaning:
- Switch off and unplug the appliance before cleaning.
- Use lukewarm water and a damp cloth with a solution of one teaspoon of bicarbonate of soda to one pint of water for interior cleaning.
- Avoid sharp abrasive instruments, soap, household cleaners, detergents, and wax polish.
- Ensure no water enters the lamp housing.
- The condenser or plastic evaporator tray at the back may require cleaning maintenance by service personnel, as they are not accessible without uninstalling the product.
- For long periods of non-use, unplug, remove all food, clean, and leave the door open.
- Regularly check door seals for cleanliness and food particles.
- Removal of Parts for Cleaning:
- Door racks: Remove contents, then push upwards from the base.
- Freezer drawers: Pull out as far as possible, tilt upwards, and pull out completely.
- Replacing the Interior Light Bulb: Requires an authorised service technician.
- Door Reversing: Detailed instructions are provided for reversing the door opening direction, allowing for flexible installation.
- Problem Solving: A troubleshooting guide is provided for common issues like the appliance not operating, including checking the plug, power supply, fuse, temperature control, and wiring. If issues persist, contact customer service.
The product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE), indicating it must be handled according to European Directive 2012/19/EU for recycling and dismantling to minimize environmental impact. Contact local authorities for disposal information. Electronic products contain hazardous substances and should not be included in the selective sorting process for general waste.
Need help?
General
To Next Page
