Why is my Beko BEPN 09C not cool enough?
If your Beko Air Conditioner isn't cooling enough, ensure all windows and doors are closed to prevent warm air from entering. Remove any heat sources from the room. Check that the exhaust air duct is properly connected and unblocked. Lower the set temperature on the unit. Also, clean the air filter if it's blocked by dust.
Why does my Beko BEPN 09C power shut off in Heating mode?
The Beko Air Conditioner may shut off in heating mode due to the automatic overheat protection function. If the air outlet temperature exceeds 70°C/158°F, the device will stop. To resolve this, switch the unit on again after it has cooled down.
General| Brand | Beko |
|---|---|
| Model | BEPN 09C |
| Category | Air Conditioner |
| Language | English |
Instructions to prevent injury to users and property damage, including 'Always do this' and 'Never do this' points.
Specifies the required room temperature range for different operating modes like COOL, DRY, HEAT.
Details on ensuring adequate electrical service, proper grounding, and receptacle requirements for safe operation.
Lists all included and optional parts with their names and quantities for the air conditioner.
Identifies and labels the different components of the air conditioner on its front and rear views.
Describes the buttons and functions available on the air conditioner's control panel.
Lists common error codes (E1-E4) and protection codes (P1) with their meanings and suggested remedies.
Explains the automatic power management function that stops the compressor/fan based on ambient temperature.
Detailed steps for operating the air conditioner in different modes: COOL, HEAT, DRY, AUTO, and FAN.
Instructions for setting the auto timer and using the Sleep/Eco mode for temperature adjustment.
Guidance on how to adjust the air flow direction using the automatic swing feature of the louver.
Information on choosing a suitable location for the air conditioner, considering firm foundation and space.
Details on fitting the window slider kit to standard vertical and horizontal window applications.
Step-by-step guide for installing the window slider kit in a double-hung sash window.
Step-by-step guide for installing the window slider kit in a sliding sash window.
Instructions for correctly installing the exhaust hose, including wall installation and placement.
Procedures for managing water drainage during dehumidifying and heating modes, and handling 'P1' errors.
Guidelines for cleaning and maintaining the air filters to ensure optimal fan operation and performance.
Instructions for cleaning the unit enclosure and preparing the appliance for long periods of non-use.
To Next Page
