Why is my Beko Air Conditioner not cool enough?
If your Beko Air Conditioner isn't cooling enough, ensure all windows and doors are closed to prevent warm air from entering. Remove any heat sources from the room. Check that the exhaust air duct is properly connected and unblocked. Lower the set temperature on the unit. Also, clean the air filter if it's blocked by dust.
Why does my Beko BEPN 12C power shut off in Heating mode?
The Beko Air Conditioner may shut off in heating mode due to the automatic overheat protection function. If the air outlet temperature exceeds 70°C/158°F, the device will stop. To resolve this, switch the unit on again after it has cooled down.
General| Brand | Beko |
|---|---|
| Model | BEPN 12C |
| Category | Air Conditioner |
| Language | English |
Guidance on proper manual use and warnings for children and individuals with reduced capabilities.
Covers cord safety, installation regulations, operating conditions, and professional service requirements.
Key safety rules including protection from moisture, transport, turning off when not in use, and maintaining air path.
Explains the swing feature, LED display information, common error codes, and power management.
Step-by-step instructions for operating the unit in COOL, HEAT, DRY, and AUTO modes.
Instructions for connecting a drain hose for water removal in dehumidifying and heating modes, ensuring proper flow.
Explains the 'P1' error for a full bottom tray and the procedure to drain and reset the unit.
Detailed guide on removing, cleaning, and reinstalling the air filters for optimal unit performance.
Solutions for unit not starting and insufficient cooling, covering common causes and remedies.
To Next Page
