How to troubleshoot a Beko Ventilation Hood that is not working?
If your Beko Ventilation Hood isn't working, start by checking your fuses. Also, make sure the mains voltage is between 220 and 240 V by inspecting the electrical connection. Finally, check if other appliances in your kitchen are operating to rule out a broader electrical issue.
Why is the air inlet of my Beko Ventilation Hood inadequate?
If the air inlet of your Beko Ventilation Hood is inadequate, inspect the grease filter, as it should be cleaned at least once a month under normal operating conditions. Also, check the air discharge chimney to ensure it's in the 'on' position. Finally, if your appliance has carbon filters, inspect the carbon filter, they should be replaced every 3 months under normal conditions.
What to do if the illumination light does not operate on my Beko Ventilation Hood?
If the illumination light on your Beko Ventilation Hood isn't working, check the electrical connection to ensure the mains voltage is between 220 and 240 V. Then, inspect the lamp switch to confirm it's in the 'on' position. Finally, inspect the lamps themselves to see if they illuminate.
General| Type | Chimney |
|---|---|
| Width | 60 cm |
| Energy Efficiency Class | A |
| Number of Speeds | 3 |
| Lighting | LED |
| Installation Type | Wall-mounted |
| Number of Motors | 1 |
| Filter Type | Aluminium |
| Material | Stainless steel |
| Fluid Dynamic Efficiency Class | B |
| Lighting Efficiency Class | A |
| Grease Filtering Efficiency Class | B |
| Colour | Black |
| Control Type | Button |
To Next Page