What to do if my Beko CEP5152B-UK coffee is not hot enough?
If the coffee from your Beko Coffee Maker isn't hot enough, it might be because the cups weren't preheated, or the brewing unit is too cold. Rinse the appliance at least 3 times before making coffee.
What to do if coffee cannot come out from spout of my Beko CEP5152B-UK Coffee Maker?
If coffee isn't coming out of the spout of your Beko Coffee Maker, it might be because the empty system function was used before. Press the hot water button until water comes out from the spout.
Why is my Beko CEP5152B-UK coffee not hot enough?
If your coffee from the Beko Coffee Maker isn't hot enough, it could be that the cups haven't been preheated, or the brewing unit is too cold. Rinse the appliance at least 3 times before making the coffee.
What to do if my Beko Coffee Maker brewer is impossible to remove?
If the brewer or coffee ground tray of your Beko Coffee Maker is impossible to remove, it could be because the appliance didn't finish the self-cleaning process and was switched off. Switch the machine on again and let it complete its auto cleaning process.
Why is my Beko CEP5152B-UK Coffee Maker not working?
The coffee maker might not be connected to the power mains. Ensure it is properly plugged in and the switch is turned on. Also, check the cable and the plug for any damage.
Why is my Beko CEP5152B-UK internal drip tray filled with a lot of water?
If the internal drip tray of your Beko Coffee Maker is filled with a lot of water, it's likely due to coffee powder that is too fine, which blocks the water from coming out. Adjust the coffee fineness to a bigger dot during grinder operation.
Why is my Beko Coffee Maker delivering coffee so slowly?
If your Beko Coffee Maker is delivering coffee too slowly, it might be because the coffee powder is too fine, blocking the water flow. Adjust the coffee fineness to a bigger dot during grinder operation.
What to do if Beko Coffee Maker coffee is not hot enough?
If the coffee from your Beko Coffee Maker isn't hot enough, it could be due to the cups not being preheated or the brewing unit being too cold. To resolve this, rinse the appliance at least three times before brewing your coffee.
How to reset rinsing cycle on Beko CEP5152B-UK Coffee Maker?
To reset the rinsing cycle: 1. Ensure the appliance is on and remove the service door. 2. Press and hold the on/off button until you hear two beeps. 3. Replace the service door.
Why is my Beko CEP5152B-UK Coffee Maker delivering coffee too slowly?
If your coffee is dispensing too slowly, the coffee grounds might be too fine, blocking the water flow. Adjust the coffee fineness to a bigger dot during grinder operation.
General| Brand | Beko |
|---|---|
| Model | CEP5152B-UK |
| Category | Coffee Maker |
| Language | English |
To Next Page
