Beko DE 8635 RX0 User Manual (English)

Questions and Answers:

C
carolynhallAug 19, 2025
Why does the Beko Dryer take so long to dry clothes?
- H
  Howard SnowAug 19, 2025
  If the drying process on your Beko Dryer is taking longer than expected, several factors could be the cause. The lint filter's pores might be clogged, which can be resolved by washing the lint filter with warm water. Alternatively, the filter drawer may be blocked, requiring you to clean the foam inside. Check if ventilation grids on the front are obstructed and remove any objects blocking them. Insufficient ventilation in a small room can also extend drying times; try opening a door or window to lower the room temperature. A buildup of lime deposit on the dampness sensor needs cleaning. Overloading the dryer or not spinning laundry sufficiently in your washing machine beforehand can also increase drying time; avoid excessive loads and ensure laundry is spun at a higher speed.
R
Robin BurtonAug 21, 2025
How to fix a Beko Dryer that won't turn on?
- L
  luis23Aug 21, 2025
  If your Beko Dryer isn't turning on or the program won't start, first ensure that the machine is properly plugged in. Check that the loading door is securely closed. Make sure you've selected a program and that the dryer isn't in Pause mode. Finally, verify whether the Childproof Lock is activated and, if so, deactivate it.
M
Mathew BarnesAug 23, 2025
Why does my Beko Dryer keep stopping mid-cycle?
- S
  scookAug 23, 2025
  If your Beko Dryer's program is being interrupted unexpectedly, there are a few things to check. Ensure that the loading door is securely closed. If there was a power failure, press the Start / Pause / Cancel button to restart the program. Also, the water tank might be full, so drain it.
F
fbrownAug 26, 2025
Why is my Beko DE 8635 RX0 leaking water from the door?
- P
  peckaprilAug 26, 2025
  If water is leaking from the loading door of your Beko Dryer, it's likely due to lint accumulation on the inner surfaces of the loading door and the door gasket. Clean these surfaces to resolve the issue.
A
Angela LarsenAug 27, 2025
How to stop the Lint Filter Cleaning symbol from flashing on my Beko Dryer?
- C
  cooperlindsayAug 28, 2025
  If the Lint Filter Cleaning symbol is flashing on your Beko Dryer, it could mean a few things. The lint filter housing might be clogged with lints, so clean it. A deposit may have built up on the lint filter pores, causing clogging, so wash the lint filter with warm water. The filter drawer could also be clogged, so clean the sponge and the filter cloth in the filter drawer.
V
Vincent DaltonAug 30, 2025
Why do my clothes feel damp after drying in my Beko Dryer?
- A
  Andrea TaylorAug 30, 2025
  If clothes feel damper than expected after drying in your Beko Dryer, it might be because the selected program wasn't suitable for the laundry type; check the care labels and select an appropriate program or use timer programs. Clogged lint filter pores can also cause this issue, so wash the lint filter with warm water. Additionally, a blocked filter drawer could be the cause, so clean the foam inside the filter drawer. Overloading the dryer or not spinning laundry sufficiently beforehand can also lead to this problem; avoid excessive loads and ensure laundry is spun at a higher speed.
J
jeffreywilliamsSep 1, 2025
What does it mean when the Filter Drawer Cleaning symbol is flashing on my Beko Dryer?
- K
  Kenneth SmithSep 1, 2025
  If the Filter Drawer Cleaning warning symbol is flashing on your Beko Dryer, it means that the filter drawer is not cleaned. You should clean the sponge and the filter cloth in the filter drawer.
B
Brittney TrujilloSep 3, 2025
What does it mean when the Lint Filter Cleaning symbol is on my Beko Dryer?
- S
  stuart23Sep 3, 2025
  If the Lint Filter Cleaning symbol is on in your Beko Dryer, it indicates that the lint filter needs to be cleaned. Clean the lint filter.
G
George OlsonSep 5, 2025
What to do if the Water Tank warning symbol is on my Beko DE 8635 RX0?
- M
  Melissa MeyerSep 5, 2025
  If the Water Tank warning symbol is on or flashing on your Beko Dryer, it indicates that the water tank is full and needs to be drained. Also, if your dryer is connected directly to a wastewater drain, make sure the water drain hose isn't bent, as this can also trigger the warning.
E
Eric HarrisonSep 7, 2025
How to prevent my clothes from shrinking in the Beko Dryer?
- K
  Kathleen GoodSep 7, 2025
  If your laundry has shrunk, become felted, or deteriorated after drying in your Beko Dryer, it's likely that a program unsuitable for the laundry type was used. Check the garment tag and select a program suitable for the fabric type.