Why won't my Beko Dishwasher start?
Your Beko Dishwasher might not start due to several reasons. First, ensure the power cable is properly plugged in. Check the fuses in your house to see if any have blown. Also, make sure the water inlet tap is open and that the dishwasher door is fully closed. Finally, verify that you've pressed the On/Off button to turn the machine on.
How to clean dishes better with my Beko Dishwasher?
If your dishes aren't getting clean in your Beko Dishwasher, several factors could be at play. Make sure dishes are loaded properly, as described in the user manual. Select a program with a higher temperature and cycle time for heavily soiled items. Check that the impellers rotate freely and that the impeller holes aren't clogged with food remnants. Also, ensure the filter system is clean and correctly installed. Avoid overloading the baskets. Store powder detergent in a closed container in a non-humid place, or consider using tablet detergents. Use sufficient detergent and rinse aid, and ensure the detergent dispenser lid is closed tightly.
What to do if detergent remains in the dispenser of my Beko Dishwasher?
If detergent remains in the dispenser of your Beko Dishwasher, make sure the dispenser is dry before adding detergent and add detergent shortly before starting the wash. Ensure dishes don't block the dispenser lid from opening during washing. Also, if using powder detergent, store it in a closed container in a non-humid place, or switch to tablet detergents. Check that the impeller holes are not clogged.
General| Door color | Stainless steel |
|---|---|
| Water fill | Cold |
| Control type | Touch |
| Product size | Full size (60 cm) |
| Built-in display | Yes |
| Custom panel-ready | No |
| Appliance placement | Freestanding |
| Cutlery compartment type | Drawer |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Water consumption per cycle | 9.5 L |
| Energy consumption per cycle | 0.84 kWh |
| Cycle time | 245 min |
| Noise level | 43 dB |
| Drying system | Active ventilation |
| AquaStop function | - |
| Delay start (max) | 24 h |
| Dishwashing programs | Auto 40-65°C, Cups 40°C, Eco 50°C, Intensive 70°C, Pre-wash, Quick |
| Number of place settings | 15 place settings |
| Number of washing programs | 8 |
| Number of temperature settings | 6 |
Weight and Dimensions| Width | 600 mm |
|---|---|
| Height | 850 mm |
Provides essential safety guidelines for using the dishwasher to prevent injury and property damage.
Outlines precautions to protect children from potential hazards associated with the dishwasher.
Guidelines for selecting the correct placement for the dishwasher to ensure proper function and safety.
Instructions on how to properly connect the dishwasher to the water supply.
Details on how to connect the dishwasher's drain hose to the drainage system.
Instructions for safely connecting the dishwasher to the electrical power supply.
Steps to follow for the first operation of the dishwasher after installation.
Further details on connecting the drain hose, including length and proper routing.
How to select, start, and cancel washing programmes on the dishwasher.
Steps to take before starting a wash cycle, including loading and checking impellers.
Guidance on selecting the most suitable washing programme based on dish type and soiling.
A detailed table comparing programmes, temperatures, durations, and consumption values.
How to use the Time Delay function to schedule wash start times.
Procedure for starting a wash programme after selecting it and closing the door.
How to stop a running wash programme and what to expect afterwards.
Explanation of the E:02 error code indicating a water supply interruption.
Explanation of the E:01 error code indicating an overflow condition.
Step-by-step guide on how to clean the micro, coarse, and metal/plastic filters.
Instructions for cleaning the lower and upper impellers to ensure efficient operation.
Specific steps for removing and cleaning the lower impeller.
Specific steps for removing and cleaning the upper impeller.
Solutions for problems where the dishwasher fails to power on or start.
Troubleshooting steps for when dishes are not getting clean after a wash cycle.
Solutions for issues related to poor drying performance after the wash cycle.
Troubleshooting steps for when rinse aid levels are insufficient or ineffective.
Troubleshooting for stubborn stains like tea, coffee, or lipstick on dishes.
Solutions for issues with lime scale deposits and misty appearance on dishes.
Addressing issues of rust, discoloration, or surface damage on dishes and cutlery.
Troubleshooting for detergent not being dispensed correctly or remaining in the compartment.
Solutions for water not draining completely from the dishwasher after a cycle.
To Next Page
