EasyManua.ls Logo

Beko DEN48X20X - User Manual

Beko DEN48X20X
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.beko.com.tr
DEN48X20X
DEN48X20G
EN
Document Number :
15 9426 0100_AA_BEKO_E9_EN/ 22-06-18.(8:04)
Dishwasher
User’s Manual

Table of Contents

Questions and Answers

  • F
    fwatsonAug 12, 2025
    What to do if my Beko DEN48X20X Dishwasher doesn't start?
    • L
      Lauren BoltonAug 12, 2025
      If your Beko Dishwasher doesn't start, several factors could be the cause. First, check if the power cable is properly plugged in. Next, inspect the fuses in your house to ensure none have blown. Also, verify that the water inlet tap is open, and the dishwasher door is fully closed. Finally, confirm that you've pressed the On/Off button to turn on the machine.
  • M
    Matthew JohnsonAug 16, 2025
    Why are my dishes not clean after using my Beko Dishwasher?
    • M
      markwilliamsAug 16, 2025
      If your dishes aren't coming out clean from your Beko Dishwasher, there might be a few reasons: * The dishes may not be placed correctly. * The selected program might be unsuitable. * The impellers could be stuck or impeller holes are clogged. * The filters might be clogged or installed incorrectly. * The baskets might be overloaded. Also, consider that the detergent might be stored improperly or you are not using enough detergent or rinse aid. Finally, ensure the detergent dispenser lid is closed tightly.
  • A
    Alexander ShannonAug 20, 2025
    What to do if dishes are not dry at the end of Beko Dishwasher cycle?
    • M
      martinezdianaAug 20, 2025
      If your dishes aren't drying in your Beko Dishwasher, ensure they are placed so water doesn't accumulate. Avoid unloading immediately after the cycle; instead, slightly open the door and wait for the steam to evacuate, then let the dishes cool before unloading from the lower basket first. Also, consider that shorter programs have lower rinsing temperatures, so select a longer program for better drying.
  • K
    Kenneth StewartAug 23, 2025
    How to fix lime traces on dishes and misty glassware in Beko Dishwasher?
    • D
      David Wood MDAug 23, 2025
      If you notice lime traces or a misty appearance on your dishes and glassware after using your Beko Dishwasher, it could be due to insufficient rinse aid. Check the rinse aid indicator and add rinse aid if necessary, or increase the rinse aid setting. Also, the water hardness setting might be low, or the salt level is insufficient, so measure the water hardness and adjust the setting accordingly. Finally, check for salt leakage around the salt filling hole and ensure the salt reservoir lid is tightly closed. Run the prewash program to remove any spilled salt.
  • K
    Karen WilliamsAug 27, 2025
    What to do if tea stains remain on dishes washed in Beko DEN48X20X?
    • J
      James BuchananAug 27, 2025
      If tea, coffee, or lipstick stains persist on dishes after washing in your Beko Dishwasher, try selecting a program with a higher temperature and longer cycle time. The surface quality of the kitchen utensils may also be a factor, as stains can penetrate deteriorated surfaces. Also, ensure your detergent is stored properly, avoiding humid conditions, and consider using tablet detergents.
  • P
    Patricia Nichols DDSAug 31, 2025
    Why is detergent left in the dispenser of my Beko DEN48X20X?
    • G
      Gabriel ScottAug 31, 2025
      If detergent remains in the dispenser of your Beko Dishwasher, it could be because the dispenser was damp when you added the detergent; ensure it's dry. Adding detergent too far in advance of washing can also cause this issue, so add it shortly before starting the cycle. Make sure dishes aren't blocking the dispenser lid from opening or preventing water from the impellers from entering. Finally, check if the impeller holes are clogged.
  • M
    Melissa RamosSep 3, 2025
    Why does my Beko DEN48X20X Dishwasher smell?
    • S
      Sean WalkerSep 3, 2025
      A strange odor in your Beko Dishwasher could be due to clogged filters. Make sure that you check if the filter system is clean. Another cause might be dirty dishes sitting in the dishwasher for a few days. If you're not running the machine immediately, remove food remnants and run the prewash program every 2 days. Leave the door slightly open to prevent odor buildup.
  • K
    Kaitlin SullivanSep 8, 2025
    What causes rust on dishes in my Beko DEN48X20X?
    • S
      Steven HinesSep 8, 2025
      Rust, discoloration, or surface deterioration on dishes in your Beko Dishwasher can occur for several reasons. Salt leakage can cause deterioration and oxidation on metal surfaces, so be careful when filling the salt reservoir and ensure the lid is closed tightly; run a prewash cycle to remove any spilled salt. Salty food remnants left on dishes for too long can also cause issues, so prewash or wash dishes promptly. An ungrounded electrical installation can create static electricity leading to surface damage. Avoid using intensive cleansers like bleach, as they can damage the protective coating on metal surfaces. Misusing metal items like knives, using low-quality stainless steel cutlery, or washing already corroded items can also contribute to these problems.

Summary

Safety and Environment

General Safety Precautions

Essential safety guidelines for operating the dishwasher to prevent personal injury or property damage.

Installation Guide

Electrical Connection

Guidance on safely connecting the dishwasher to the electrical mains supply.

Operating the Product

Programme Selection

Guide to selecting the appropriate wash programme based on dish type and soiling.

Water Warning Indicators

Explanation of E:02 (water cut-off) and E:01 (overflowing) warning codes.

Maintenance and Cleaning

Cleaning Interior and Filters

Steps for cleaning the interior tank and the micro/coarse filters.

Troubleshooting Common Issues

Machine Not Starting

Solutions for common problems when the dishwasher fails to power on or start.

Dishes Not Clean

Troubleshooting steps for issues related to poor washing performance.

Dishes Not Drying Properly

Solutions for when dishes remain wet or not fully dry after a cycle.

Guarantee Information

Standard Manufacturer Guarantee

Terms and conditions for the Beko UK and Ireland manufacturer's guarantee.

Obtaining Service and Support

Instructions on how to get service, advice, and contact customer support.

Beko DEN48X20X Specifications

General IconGeneral
Appliance placementFreestanding
Product sizeFull size (60 cm)
Built-in displayYes
Inlet hose length1.5 m
Outlet hose length1.5 m
Noise level44 dB
Number of washing programs8
Drying systemStatic
Delayed start timerYes
AquaStop functionYes
Adjustable feetYes
Upper basket adjustable heightYes
Salt indicatorYes
Rinse aid indicatorYes
Water consumption per cycle9.5 L
Power consumption (off)0.5 W
Connected load2100 W
AC input voltage220-240 V
AC input frequency50 Hz
Depth60 cm
Height85 cm
Weight43.6 kg
Half LoadYes
Washing programsEco, Intensive, Quick, Glass, Delicate
Delayed startUp to 24 hours
Energy consumption per cycle0.95 kWh
Width59.8 cm
Capacity12 place settings
Energy RatingD
Water Consumption9.5 L
ProgramsAuto, Eco 50°C, Glass/delicate, Intensive 70°C, Quick & Clean, Quick 30' 40°C
Dimensions (HxWxD)85x60x60 cm

Related product manuals