Beko DFS28123X - User Manual

43 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

www.beko.com.tr

EN

Document Number :

15 9298 0100_AA_BEKO_D145_EN/ 14-08-18.(9:23)

Dishwasher

User’s Manual

Table of Contents

Questions and Answers

P
Patrick WilsonAug 11, 2025
Why my Beko Dishwasher doesn't start?
- D
  Deborah SchultzAug 11, 2025
  Your Beko Dishwasher might not be starting due to several reasons: * The power cable may be unplugged, so check if it's properly connected. * A fuse in your house might be blown, so inspect your fuses. * The water supply could be cut off, so ensure the water inlet tap is open. * The dishwasher door might not be closed properly, so make sure it's securely shut. * The On/Off button might not have been pressed, so ensure you've turned the machine on.
K
Kelly MorrisAug 22, 2025
What to do if dishes are not dry at the end of Beko Dishwasher cycle?
- S
  Savannah IbarraAug 22, 2025
  If your dishes aren't drying in your Beko Dishwasher, consider the following: * Ensure dishes are placed so water doesn't accumulate in them. * Check the rinse aid indicator and add rinse aid if necessary. You might also need to increase the rinse aid setting if there is enough rinse aid in the machine.
A
Amber RobertsAug 28, 2025
What to do if water remains in the Beko Dishwasher after cycle?
- A
  anthonyhernandezAug 29, 2025
  If water remains in your Beko Dishwasher after the cycle, it could be due to: * Clogged filters: Check if the filter system is clean. * A clogged or blocked discharge hose: Inspect the discharge hose and clear any blockages.
R
Roberto WalkerSep 4, 2025
Why does detergent remain in the dispenser of my Beko Dishwasher?
- T
  Tonya ParkerSep 4, 2025
  Detergent might remain in the dispenser of your Beko Dishwasher because: * The dispenser was damp when you added detergent, so make sure it's dry before filling it. * You added detergent too long before starting the wash, so add it shortly before starting. * Dishes are blocking the dispenser lid from opening, so rearrange them to allow the lid to open and water to enter from the impellers. * The detergent is stored under unsuitable conditions, so if you're using powder detergent, store it in a closed container in a non-humid place; consider using tablet detergents. * The impeller holes are clogged, so clean the impellers regularly to remove any food remnants.
L
lisa87Nov 15, 2025
Why are my dishes not washed clean in my Beko DFS28123X?
- K
  Kelly FloydNov 15, 2025
  There might be several reasons why your dishes aren't getting clean in your Beko Dishwasher: * Dishes may not be placed correctly, so load them as described in the user manual. * The selected program may be unsuitable, so select a program with a higher temperature and cycle time. * The impellers might be stuck, so manually turn the lower and upper impellers to ensure they rotate freely. * The impeller holes could be clogged, so clean them regularly, removing any food remnants. * The filters might be clogged, so check and clean the filter system regularly. * The filters may be installed incorrectly, so check and make sure they are installed correctly. * The baskets might be overloaded, so do not exceed their capacity. * The detergent may be stored improperly, so if using po...

Beko DFS28123X Specifications

General

Brand	Beko
Model	DFS28123X
Category	Dishwasher
Language	English

Related product manuals

Preview: Beko DFS28120W

Preview: Beko DFS28021W

Preview: Beko DFS28R20W

Preview: Beko DFS28020X