Why is my Beko Refrigerator making a wind blowing sound?
If you hear a wind blowing sound coming from your Beko Refrigerator, it's because the product uses a fan for the cooling process. This is normal and not a malfunction.
What to do if the compressor is not running on my Beko DN168120 Refrigerator?
If the compressor in your Beko Refrigerator isn't running, it could be due to a few reasons. The protective thermic of the compressor might blow out during power failures; the refrigerator should start running after about 6 minutes. If it doesn't, contact service. The fridge may be in a defrost cycle, which is normal for a full-automatically defrosting refrigerator. Ensure the refrigerator is plugged into the socket and that the temperature settings are correct. Also, check for any power outages.
How to stop vibrations or noise coming from my Beko DN168120?
If your Beko Refrigerator is vibrating or making unusual noises, ensure the floor is level and stable. Adjust the feet to balance the refrigerator if it rocks. Also, remove any items placed on top of the refrigerator that may be causing the noise.
What to do if the fridge temperature is very low in my Beko DN168120?
If the fridge temperature in your Beko Refrigerator is too low while the freezer temperature is fine, the fridge temperature may be set too low. Adjust the fridge temperature to a warmer setting and check.
What to do if the freezer temperature is very low in my Beko Refrigerator?
If the freezer temperature in your Beko Refrigerator is too low while the fridge temperature is sufficient, the freezer temperature might be set too low. Adjust the freezer temperature to a warmer setting and check.
Why is there condensation on the outside of my Beko DN168120 Refrigerator?
If you notice condensation on the exterior of your Beko Refrigerator or between the doors, it's likely due to humid weather. This is normal, and the condensation should dissipate when the humidity decreases.
Why is the compressor in my Beko DN168120 not working?
If the compressor in your Beko Refrigerator isn't working, it could be due to a few reasons. If there was a sudden power failure or the refrigerator was unplugged and plugged back in, the gas pressure in the cooling system might be unbalanced. The product will restart after approximately 6 minutes. Also, defrosting may be active, which is normal for a fully-automatic defrosting product. Make sure the power cord is plugged in and the temperature setting is correct. If the power is out, the product will operate normally once power is restored.
Why is there condensation on the inside of my Beko DN168120?
Condensation on the internal walls of your Beko Refrigerator is often normal. Hot or humid weather can increase icing and condensation. Avoid opening the doors too frequently, and make sure the door is fully closed.
Why is there condensation on the inner walls of my Beko DN168120 Refrigerator?
Condensation on the inner walls of your Beko Refrigerator is often normal. Hot and humid weather can increase icing and condensation. Avoid opening the doors frequently or leaving them ajar, and ensure the door is completely closed.
Why is my Beko DN168120 running frequently or for a long time?
There are several reasons why your Beko Refrigerator might be running for extended periods. It could be normal if it's a new, larger model or if the room temperature is high. If you've recently plugged it in or loaded it with food, it will take longer to reach the set temperature. Avoid putting hot food inside. Ensure doors aren't opened frequently or left ajar, and that the door seals are clean and intact. Also, check that the refrigerator isn't set to a very low temperature.
General| Brand | Beko |
|---|---|
| Model | DN168120 |
| Category | Refrigerator |
| Language | English |
To Next Page
