9
EN
1. Remove the hose on the machine by pulling it
out from its end. Do not use any tools to take
out the hose.
2. Connect the special drain hose supplied with
the machine to the pipe fitting.
3. The other end of the drain hose can be directly
connected to the wastewater drain or to the
washbasin. The fitting must always be secured
in all types of connections. Your house may
be flooded if the hose gets out of its housing
during water discharge.
Important:
• The hose should be attached to a height of
maximum 80 cm.
• You must be careful not the pinch or bend the
hose.
• The end of the hose should not be bent, it
should not be stepped on and it must not be
folded between the drain and the machine.
Adjusting the feet
In order to ensure that your machine operates
more silently and vibration-free, it must stand level
and balanced on its feet. Balance the machine by
adjusting the feet.
Rotate the feet to adjust until the machine stands
level and firmly.
C Never unscrew the adjustable feet from their
housings.
First use
• To have the product ready for operation before
calling the authorised service agent, make sure
that its location and power supply installations
are appropriate. If they are not, call a qualified
electrician to have any necessary arrangements
carried out.
• Make sure that the power connections of the
product are in accordance with the instructions
given in relevant chapters of this manual.
Disposing of packaging material
Packaging materials are dangerous to children. Keep
packaging materials in a safe place out of reach of
children. Packaging materials of your product are
manufactured from recyclable materials. Sort and
dispose of them in accordance with recycled waste
instructions. Do not dispose of them with normal
domestic waste.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain and vent connections
(if any).
3. Drain water remaining in the machine
completely before transportation.
Disposing of the old machine
Dispose of your old machine in an environmentally
friendly manner.
Refer to your local dealer or solid waste collection
centre in your area to learn how to dispose of your
machine.
Before disposing of your old machine, cut off the
power cable plug and make the loading door lock
unusable to avoid dangerous conditions to children.
To Next Page
