How to fix a Beko Dishwasher that won't start?
If your Beko Dishwasher isn't starting, several factors could be at play. First, ensure the power cable is securely plugged in. Next, check the fuses in your house. Also, verify that the water inlet tap is fully open. Make sure the dishwasher door is completely closed and that you've pressed the On/Off button to power on the machine.
Why are dishes not washed clean in my Beko Dishwasher?
If your dishes aren't coming out clean from your Beko Dishwasher, several issues could be the cause. Start by ensuring dishes are loaded properly, as described in the user manual. Select a wash programme with a higher temperature and longer cycle time. Check that the impellers rotate freely by hand before starting. Clean the impellers and filters regularly, ensuring they aren't clogged with food. Also, make sure the filters are installed correctly. Avoid overloading the baskets. Store powder detergent in a dry place or use tablet detergents. Use enough detergent and rinse aid, ensuring the detergent dispenser lid is closed tightly.
What to do if detergent remains in the dispenser of my Beko DSS05011X Dishwasher?
If detergent is left in the dispenser of your Beko Dishwasher after a cycle, make sure the dispenser was dry when you added the detergent and that you added the detergent shortly before starting the wash. Ensure dishes aren't blocking the dispenser lid from opening or water from the impellers reaching it. Store powder detergent in a dry place, or use tablets. Also, check the impeller holes for clogs and clean them regularly.
Why is there rust on dishes after using my Beko DSS05011X Dishwasher?
If you notice rust, discoloration, or surface deterioration on your dishes after using your Beko Dishwasher, there are several potential causes. Ensure you're not spilling salt when filling the reservoir and that the lid is tightly closed. Run a prewash cycle to remove any spilled salt. Wash salty food remnants immediately, and verify your electrical installation is properly grounded. Avoid using intensive cleansers like bleach. Don't use metal items for unintended purposes. Be aware that low-quality stainless steel cutlery is prone to corrosion and shouldn't be washed in the dishwasher. Also, do not wash already corroded items in the dishwasher.
General| Type | Freestanding |
|---|---|
| Capacity | 10 place settings |
| Wash Programs | 6 |
| Height | 85 cm |
| Depth | 60 cm |
| Delay Start | Yes |
| Half Load Option | No |
| Width | 600 mm |
| Water consumption per cycle | 9.5 L |
To Next Page
