Why my Beko DSS28121X does not start?
If your Beko Dishwasher doesn't start, several factors could be at play. First, ensure the power cable is securely plugged in. Then, check the fuses in your house. Also, verify that the water inlet tap is open and the dishwasher door is fully closed. Lastly, confirm that you've pressed the On/Off button to activate the machine.
Why are my dishes not clean after using my Beko DSS28121X Dishwasher?
If your Beko Dishwasher leaves dishes unclean, several factors could be the cause. Ensure dishes are loaded according to the user manual. Select a program with a higher temperature and cycle time. Manually rotate the impellers to ensure they spin freely. Check and clean the impellers and filter system regularly. Verify the filter system is correctly installed. Avoid overloading the baskets. Store powder detergent in a closed container in a dry place, or switch to tablet detergents. Adjust the detergent amount based on the dishes' soil level, or use tablet detergents. Check and refill the rinse aid if needed, and increase the rinse aid setting if necessary. Finally, ensure the detergent dispenser lid is tightly closed after adding detergent.
How to fix dishes not drying in Beko DSS28121X Dishwasher?
If your Beko Dishwasher leaves dishes wet, make sure to load them so water doesn't pool. Also, check the rinse aid level and add more if needed. You might also need to increase the rinse aid setting.
What to do if detergent remains in the Beko Dishwasher dispenser?
If detergent remains in the dispenser of your Beko Dishwasher, make sure the dispenser is dry before adding detergent and add detergent right before starting the wash. Ensure dishes aren't blocking the dispenser lid from opening or the impellers from spraying water. Store powder detergent properly in a dry, closed container, or consider using tablets. Also, check the impellers for clogs and clean them regularly.
Why does my Beko Dishwasher leave a film on glasses?
If your glasses have a milky or rainbow film after washing in your Beko Dishwasher, it might be due to too much rinse aid. Try lowering the rinse aid setting and clean up any spills when filling. It could also be corrosion from soft water. Check your water hardness setting and adjust it. If your water is soft, don't use salt. Use hotter wash cycles (60-65°C) and consider using glass-protective detergents.
How to prevent scratches on dishes in Beko DSS28121X Dishwasher?
If your Beko Dishwasher is scratching dishes, it could be due to salt leakage. Be careful when filling the salt reservoir to avoid spillage, and ensure the lid is tightly closed. Run a prewash cycle to remove any spilled salt. Also, check your water hardness setting and adjust it if necessary. When loading, avoid letting glasses touch each other or other dishes to prevent scratches.
General| Type | Freestanding |
|---|---|
| Energy Efficiency Class | E |
| Number of Place Settings | 13 |
| Drying System | Static |
| Dimensions (H x W x D) | 85 x 45 x 60 cm |
| Product Type | Dishwasher |
| Capacity | 13 Place Settings |
| Energy Rating | E |
| Width | 60 cm |
| Delay Start | Yes |
| Half Load | Yes |
| Child Lock | Yes |
| Programs | Eco, Intensive, Quick, Mini, Prewash |
To Next Page
