EasyManua.ls Logo

Beko DUT36520X - User Manual

Beko DUT36520X
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.beko.com.tr
DUT36520X
DUT36520W
USA
Document Number :
Dishwasher
User manual
18 7507 01 00_AA_BEKO_UC6_USA/ 23-09-19.(11:02)

Other manuals for Beko DUT36520X

Questions and Answers

  • A
    Amy BrightAug 13, 2025
    Why my Beko DUT36520X Dishwasher doesn't start?
    • J
      Joshua MoodyAug 13, 2025
      If your Beko Dishwasher doesn't start, several factors could be the cause. First, check if the power cable is properly plugged in. Also, verify the circuit breaker in your house hasn't blown. Ensure the water inlet tap is open, the dishwasher door is fully closed, and that you've pressed the On/Off button to turn the machine on.
  • J
    John PatrickAug 17, 2025
    What to do if Beko Dishwasher dishes are not washed clean?
    • T
      Troy WebbAug 17, 2025
      If your Beko Dishwasher isn't cleaning dishes effectively, consider these potential causes: the dishes may not be placed properly in the machine; the selected program may be unsuitable; the wash arms could be stuck or have clogged holes; the filters might be clogged or installed incorrectly; the baskets may be overloaded; the detergent could be stored improperly or insufficient in quantity; the rinse aid might be insufficient; or the detergent dispenser lid may be left open. To resolve this, load dishes correctly, select a suitable program, ensure wash arms rotate freely and are clean, maintain clean and correctly installed filters, avoid overloading baskets, store detergent properly, use enough detergent and rinse aid, and ensure the detergent dispenser lid is tightly closed.
  • M
    Michael BennettAug 21, 2025
    Why Beko DUT36520X leaves dishes wet?
    • J
      Jared BridgesAug 21, 2025
      If dishes are not dry after a Beko Dishwasher cycle, ensure dishes are placed so water doesn't accumulate. Check and replenish rinse aid, increasing the setting if needed. Avoid unloading immediately after the program ends; slightly open the door and wait for steam to evacuate before unloading from the lower basket first. Select a longer program for better drying. Note that deteriorated kitchen utensil surfaces may not dry well and aren't recommended for dishwasher use.
  • B
    bmillerAug 25, 2025
    How to fix stains remaining on dishes in Beko DUT36520X Dishwasher?
    • R
      Rebecca MitchellAug 25, 2025
      If stains remain on dishes after a Beko Dishwasher cycle, it could be due to several reasons. The selected program may be unsuitable, so try a program with a higher temperature and longer cycle time. Also, if the surface quality of the kitchen utensils is deteriorated, tea and coffee stains or other dye spots may not be cleaned. Avoid storing detergent in humid conditions; keep it in a closed container or use tablet detergents.
  • J
    Jessica SullivanAug 28, 2025
    What to do if Beko DUT36520X leaves lime traces on dishes?
    • L
      lthompsonAug 28, 2025
      If lime traces remain on dishes and glassware appears misty after using your Beko Dishwasher, check if the rinse aid is sufficient and add more if needed, increasing the rinse aid setting if there's enough in the machine. Also, measure the hardness of the supply water and check the water hardness setting. Be careful not to spill salt while adding it, ensure the salt reservoir lid is tightly closed, and run the prewash program to remove any spilled salt.
  • A
    Amanda WilliamsonSep 1, 2025
    What causes detergent to remain in my Beko DUT36520X dispenser?
    • M
      Melissa CarpenterSep 1, 2025
      If detergent remains in the dispenser of your Beko Dishwasher, ensure the dispenser is dry before adding detergent and add detergent shortly before starting the wash. Make sure dishes don't block the dispenser lid from opening or water from reaching the impellers. Avoid storing powder detergent in humid places; use a closed container or tablet detergents. Also, check and clean the wash arm holes, as they might be clogged with food remnants.
  • A
    Alexandra GilbertSep 5, 2025
    How to prevent rust on dishes in Beko Dishwasher?
    • J
      John AlvarezSep 5, 2025
      To prevent rust, discoloration, or surface deterioration on dishes in your Beko Dishwasher: be careful not to spill salt when filling and ensure the salt reservoir lid is tightly closed, running a prewash cycle to remove any spillage. Remove salty food remnants before loading or prewash silverware. Ensure the electrical installation is grounded. Avoid using intensive cleansers like bleach. Use metal items only for their intended purposes, avoid washing low-quality stainless steel items, and do not wash already corroded items in the dishwasher.
  • M
    Meagan EscobarSep 8, 2025
    Why does my Beko DUT36520X Dishwasher smell?
    • E
      emilyrichmondSep 8, 2025
      A different odor in your Beko Dishwasher may be due to clogged filters, so check and clean them regularly. If you're not running the machine immediately after loading, remove food remnants and run the Prewash program without detergent every 2 days, leaving the door slightly open to prevent odor build-up. You can also use commercial odor removers or machine cleaners.

Beko DUT36520X Specifications

General IconGeneral
Stylebuilt in
Colorstainless steel
Load Capacity15 place settings
Number of Cycles6
Number of Options5
Drying Typestatic drying; heated
Noise level45 db
Control Typetouchpad; electronic touch control
Delay Startyes
Spray Arms3
Water Filteryes; partial metal
Leak Protectionyes
Water Softenerno
Food Disposerno
Sanitize Settingsyes
Half Loadyes
Wi-Fino
Smart Homeno
Remote Controlno
Voltage120 volts
Frequency60 hz
Current15
Weight and Dimensions IconWeight and Dimensions
Depth22 7/16 inch
Height33 7/8 inch
Width23 9/16 inch
Net Weight90.61 lbs

Related product manuals