Why Beko DVN Dishwasher doesn't start?
Your Beko Dishwasher might not be starting due to several reasons. It could be that the power cable is unplugged, so check if it's properly connected. Another possibility is a blown fuse in your house, so inspect your fuses. Also, ensure that the water inlet tap is open and that the dishwasher door is fully closed. Finally, make sure you've pressed the On/Off button to turn the machine on.
Why are my dishes not washed clean in my Beko DVN Dishwasher?
If your dishes aren't coming out clean from your Beko Dishwasher, several factors could be at play. Ensure the dishes are loaded properly as described in the user manual. The selected program might be unsuitable, so try a program with a higher temperature and cycle time. Check if the impellers are stuck and rotate them freely by hand. Also, inspect the impeller holes and filters for clogs, cleaning them as needed. Make sure the filters are installed correctly and that the baskets aren't overloaded. Consider the detergent; if using powder, ensure it's stored properly and used in sufficient amounts. Check the rinse aid level and adjust if necessary. Finally, ensure the detergent dispenser lid is closed tightly.
What to do if tea, coffee or lipstick stains remain on dishes after using my Beko DVN Dishwasher?
If tea, coffee, or lipstick stains persist on dishes after using your Beko Dishwasher, try selecting a program with a higher temperature and cycle time. Be aware that stains may not be removed from kitchen utensils with deteriorated surfaces, and it's not recommended to wash such items in the dishwasher for hygiene reasons. Also, ensure that if you are using powder detergent, do not store the detergent package in humid places, and keep it in a closed container if possible.
What to do if my Beko DVN has a different odour?
If you notice an unusual odor in your Beko Dishwasher, it could be due to clogged filters. Check and clean the filter system regularly. Also, if you're not running the dishwasher immediately after loading, remove food remnants and run the Prewash program every 2 days without detergent. Avoid completely closing the dishwasher door to prevent odor buildup. You might also consider using commercially available odor removers or machine cleaners.
Why do lime traces remain on dishes and glassware in my Beko DVN?
Lime traces on dishes and a misty appearance on glassware in your Beko Dishwasher can occur if the rinse aid is insufficient. Check the rinse aid indicator and add more if needed, or increase the rinse aid setting. It may also be due to a low water hardness setting or insufficient salt level, so measure the water hardness and adjust the setting accordingly. Also, check for salt leakage, being careful not to spill salt when filling and ensuring the salt reservoir lid is tightly closed. Run the prewash program to remove any spilled salt.
How to prevent rust, discoloration, or surface deterioration on dishes in my Beko DVN Dishwasher?
To prevent rust, discoloration, or surface deterioration on dishes in your Beko Dishwasher, avoid salt leakage by carefully filling the salt reservoir and ensuring the lid is tightly closed. Remove salty food remnants promptly with a prewash. Verify that your electrical installation is properly grounded to prevent static electricity. Avoid using intensive cleansers like bleach. Use metal items, especially knives, only for their intended purposes. Be aware that cutlery made of low-quality stainless steel is prone to corrosion and should not be washed in the dishwasher. Also, do not wash already corroded items in the dishwasher, as rust can spread to other surfaces.
Why is detergent remaining in the dispenser of my Beko DVN Dishwasher?
If detergent remains in the dispenser of your Beko Dishwasher, ensure the dispenser is dry before adding detergent and add the detergent shortly before starting the wash cycle. Make sure dishes aren't blocking the dispenser lid from opening or preventing water from the impellers from entering. Avoid storing powder detergent in humid conditions. Check the impeller holes for clogs and clean them regularly.
General| Brand | Beko |
|---|---|
| Model | DVN Series |
| Category | Dishwasher |
| Language | English |
Important safety instructions for operation and defining the product's intended domestic use.
Guidelines for child safety and responsible disposal of packaging and product.
Information on WEEE, RoHS directives, and safe product transportation.
Identification and description of the dishwasher's various parts and components.
Detailed technical data, power input, and compliance information for the dishwasher.
Explanation of the fan drying system and its operation.
Selecting location and connecting the water supply for proper installation.
Connecting the drain hose and adjusting the dishwasher feet for stability.
Safety features and electrical hookup instructions for the dishwasher.
Steps to follow for the first use of the dishwasher after installation.
Understanding water hardness, adjusting settings, and adding salt.
Guidance on selecting and using detergents and rinse aid.
Properly loading dishes and adjusting various baskets and racks.
Overview of the control panel, main keys, and their operations.
Selecting programs, starting, monitoring, and cancelling wash cycles.
Using auxiliary functions, child lock, self-dry, and understanding warning indicators.
Adjusting rinse aid and concluding the wash cycle.
Procedures for cleaning the main filters and the water inlet hose filter.
How to clean the inside of the machine and its outer surfaces.
Instructions for cleaning the lower and upper impellers for efficient operation.
Steps to diagnose and resolve problems when the dishwasher fails to start.
Solutions for unclean, wet dishes, and stubborn stains.
Addressing lime traces, misty appearance, rust, and scratches on dishes.
Troubleshooting detergent dispenser, foam, broken utensils, and remaining water.
To Next Page
