Beko FFMEP3685W - User Manual

Need help?

Do you have a question about the Beko FFMEP3685W and is the answer not in the manual?

Summary

Safety and Environment Instructions

General Safety

Provides essential safety guidelines for product operation, installation, and maintenance.

Intended Use

Specifies the product's intended use for domestic purposes and food storage only.

Installation

Appropriate Installation Location

Guidelines for selecting the best location for product installation, considering ventilation and heat sources.

Electrical Connection

Details on safe and correct electrical connection procedures, including grounding and socket requirements.

Operating the Product

Indicator Panel

Explains the control panel's icons, buttons, and indicators for user interaction.

Freezing Fresh Food

Provides instructions on how to freeze fresh food correctly to maintain quality.

Recommendations for Preserving the Frozen Food

Troubleshooting

The Refrigerator is Not Working

Common causes and solutions when the refrigerator fails to operate.

Condensation on the Side Wall of the Cooler Compartment

Addresses issues related to condensation buildup on cooler compartment walls.

Compressor is Not Working

Troubleshooting steps for when the compressor fails to start or operate.

The Refrigerators Operating Noise is Increasing While in Use

The Refrigerator Runs Too Often or for Too Long

Reasons why the refrigerator motor may run for extended periods.

The Freezer Temperature is Very Low, but the Cooler Temperature is Adequate

Troubleshooting steps when the freezer is too cold, but the cooler is normal.

The Cooler Temperature is Very Low, but the Freezer Temperature is Adequate

The Food Items Kept in Cooler Compartment Drawers Are Frozen

The Temperature in the Cooler or the Freezer is Too High

Diagnoses for high temperatures in either the cooler or freezer compartments.

There is Condensation on the Products Internal Walls

There is Condensation on the Products Exterior or Between the Doors

The Door is Not Closing

Troubleshooting steps for when the appliance door does not close properly.

Summary

Safety and Environment Instructions

General Safety

Provides essential safety guidelines for product operation, installation, and maintenance.

Intended Use

Specifies the product's intended use for domestic purposes and food storage only.

Installation

Appropriate Installation Location

Guidelines for selecting the best location for product installation, considering ventilation and heat sources.

Electrical Connection

Details on safe and correct electrical connection procedures, including grounding and socket requirements.

Operating the Product

Indicator Panel

Explains the control panel's icons, buttons, and indicators for user interaction.

Freezing Fresh Food

Provides instructions on how to freeze fresh food correctly to maintain quality.

Recommendations for Preserving the Frozen Food

Troubleshooting

The Refrigerator is Not Working

Common causes and solutions when the refrigerator fails to operate.

Condensation on the Side Wall of the Cooler Compartment

Addresses issues related to condensation buildup on cooler compartment walls.

Compressor is Not Working

Troubleshooting steps for when the compressor fails to start or operate.

The Refrigerators Operating Noise is Increasing While in Use

The Refrigerator Runs Too Often or for Too Long

Reasons why the refrigerator motor may run for extended periods.

The Freezer Temperature is Very Low, but the Cooler Temperature is Adequate

Troubleshooting steps when the freezer is too cold, but the cooler is normal.

The Cooler Temperature is Very Low, but the Freezer Temperature is Adequate

The Food Items Kept in Cooler Compartment Drawers Are Frozen

The Temperature in the Cooler or the Freezer is Too High

Diagnoses for high temperatures in either the cooler or freezer compartments.

There is Condensation on the Products Internal Walls

There is Condensation on the Products Exterior or Between the Doors

The Door is Not Closing

Troubleshooting steps for when the appliance door does not close properly.

This document serves as a comprehensive user manual for a Beko Freezer with Multizone functionality, model FFMEP3685W, providing essential information for its safe installation, operation, and maintenance.

Function Description

The Beko FFMEP3685W is a freezer designed for home use, featuring a unique "Multizone" compartment that offers flexible storage options. This Multizone compartment can be configured to operate as either a fridge or a freezer, adapting to the user's specific storage needs. The appliance is primarily intended for storing food and beverages. It incorporates a cooling system that uses R600a gas, a flammable refrigerant, necessitating careful handling during use and relocation to prevent damage to the cooling circuit. The freezer compartment is designed for deep-freezing fresh food and storing already frozen items, maintaining temperatures at -18°C or lower for long-term preservation. The product also includes a crisper or chiller compartment for specific food types and adjustable legs for stable positioning.

Usage Features

The freezer is equipped with an intuitive indicator panel that allows users to monitor and control its various functions. Key features on the panel include:

Power failure/High temperature/Error warning icon: This indicator illuminates in case of power failure, high temperatures within the freezer compartment, or sensor failures, alerting the user to potential issues. It displays the maximum temperature reached during a high-temperature event and can be cleared by pressing any button or the alarm off button.
Energy saving (display off) icon: This function automatically activates when the doors remain closed for an extended period, turning off most display icons to conserve energy. It reactivates upon opening a door or pressing a button. This is a factory default setting and cannot be cancelled.
Multi Zone quick fridge/freeze button: This button allows for rapid cooling or freezing within the Multizone compartment, depending on its configured mode. When activated, the Multizone temperature indicator shows 1°C for quick fridge mode or -27°C for quick freeze mode. These functions automatically cancel after 1 hour (quick fridge) or 24 hours (quick freeze) if not manually deactivated.
Multi Zone compartment mode selection button: By pressing and holding this button for 3 seconds, users can switch the Multizone compartment between fridge and freezer modes. The default setting for the Multizone compartment is freezer mode.
Multi Zone compartment temperature setting button: This button enables temperature adjustment for the Multizone compartment. In fridge mode, temperatures can be set between 1°C and 8°C. In freezer mode, temperatures can be set between -18°C and -24°C.
Multi Zone compartment on/off button: Pressing and holding this button for 3 seconds deactivates the Multizone compartment, showing "--" on the temperature indicator. Activating it again for 3 seconds restores its function. This feature allows for energy saving when the compartment is not needed for food storage.
Termination of the High Temperature Warning: A dedicated button allows users to clear the high-temperature warning after checking the food in the freezer compartment.
Key lock: This feature, activated by pressing and holding a specific button for 3 seconds, locks all other buttons on the panel, preventing accidental changes to settings. The key lock icon illuminates when active.
Eco-fuzzy button: Activating this function by pressing and holding for 1 second allows the refrigerator to operate in the most economical mode, typically after 6 hours, indicated by an illuminated icon.
Freezer compartment temperature setting button: This button allows users to set the freezer compartment temperature between -18°C and -24°C.
Quick freeze button: This button activates a fast-freezing function for the main freezer compartment, indicated by an illuminated icon and a display of -27°C. This function is ideal for freezing large quantities of fresh food quickly and automatically cancels after 24 hours.

For optimal food preservation, it is recommended to freeze food as quickly as possible, using the fast freezing feature when placing new items in the freezer. Food should be packed in air-proof containers, foils, or plastic bags and labeled with the freezing date. Frozen food should be used immediately after thawing and not refrozen. Certain foods like bananas, tomatoes, lettuce, celery, boiled eggs, and potatoes are not suitable for freezing as their nutritional value and taste will be negatively affected.

The manual also provides guidance on placing different types of food in various compartments:

Freezer compartment shelves: For various frozen foods like meat, fish, ice cream, and vegetables.
Refrigerator compartment shelves: For food in pans, covered plates, and closed containers, including eggs.
Door shelves of fridge compartment: For small and packaged food or beverages.
Crisper: For vegetables and fruits.
Fresh zone compartment: For delicatessen items (breakfast food, meat products) to be consumed in a short time.

Maintenance Features

Regular cleaning is crucial for extending the service life of the product and preventing bad odors. The manual outlines specific maintenance guidelines:

Cleaning: The product should be unplugged before cleaning. Harsh chemicals, abrasive tools, soap, and detergents should be avoided. A solution of one teaspoon of bi-carbonate in half a liter of water is recommended for cleaning the interior. Care must be taken to prevent water from entering electrical components. If the refrigerator will not be used for a long time, it should be unplugged, emptied, cleaned, and the door left ajar.
Door Gaskets: Door gaskets should be checked and cleaned regularly to ensure proper sealing. Damaged or worn gaskets should be replaced by an Authorized Service Agent.
Shelves: Door and body shelves can be removed for cleaning by pulling them up and then sliding them back into place.
Exterior Cleaning: Chlorine-containing cleaning agents should not be used on outer surfaces or chromium-coated parts, as they can cause corrosion.
Avoiding Bad Odours: To prevent odors, the refrigerator should be kept clean, and food should always be stored in closed containers. Expired or spoiled food should be removed promptly.
Protecting Plastic Surfaces: Liquid oils or oil-cooked meals should not be placed in unsealed containers as they can damage plastic surfaces. Spills should be cleaned immediately with warm water.

The manual also addresses troubleshooting common issues, such as the refrigerator running too often or too long, condensation, unusual noises (liquid flowing, spraying, wind blowing), and bad odors. For complex problems not resolved by the troubleshooting guide, users are advised to contact an Authorized Service Agent and refrain from attempting repairs themselves, especially for parts not listed for self-repair, to avoid safety issues and voiding the warranty. The Multizone compartment's baskets/drawers should always be in use for low energy consumption and better storage conditions. Food contact with the temperature sensor in the freezer compartment should be avoided as it may increase energy consumption.