EasyManua.ls Logo

Beko FN 126400 S - User Manual

Beko FN 126400 S
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FN 126400
FN 126400 S
Freezer
Congélateur
) (

Table of Contents

Questions and Answers

  • E
    Elizabeth HernandezAug 14, 2025
    What to do if my Beko Freezer does not operate?
    • D
      David DyerAug 14, 2025
      If your Beko Freezer isn't operating, start by ensuring the plug is securely inserted into the socket. Then, check the fuse of the socket your freezer is connected to, as well as the main fuse, to see if they have blown. Also ensure that the correct temperature value is set. If there was a power outage, the freezer should return to normal operation once the power is restored.
  • B
    bcooperAug 17, 2025
    Why is the temperature in my Beko FN 126400 S Freezer too high?
    • A
      Aaron McclureAug 17, 2025
      If the temperature in your Beko Fridge or Freezer is very high, it could be because the fridge temperature is adjusted to a very high value. Doors being opened frequently or left ajar for extended periods can also cause this. Ensure the door is completely closed. If the refrigerator was recently plugged in or loaded with food, allow it time to reach the set temperature. Avoid placing large amounts of hot food inside.
  • M
    Matthew FloresAug 21, 2025
    How to reduce noise from my Beko FN 126400 S?
    • T
      Tyler StephensAug 21, 2025
      If your Beko Freezer is producing vibrations or noise, it might be because the floor is not level or stable. Try balancing the freezer by adjusting its feet and ensure the floor is strong enough to support it. The noise could also be due to items placed on top of the freezer; remove these items to see if the noise stops.
  • L
    Lisa FloresAug 25, 2025
    Why is my Beko FN 126400 S Freezer fridge temperature too low?
    • J
      Jonathan JenkinsAug 25, 2025
      If the fridge temperature in your Beko Freezer is very low while the freezer temperature is sufficient, it's likely that the fridge temperature is set too low. Adjust the fridge temperature to a warmer setting and check again.
  • V
    Victoria MartinAug 28, 2025
    Why is my Beko FN 126400 S Freezer freezer temperature too low?
    • M
      Melissa JordanAug 28, 2025
      If the freezer temperature in your Beko Freezer is very low while the fridge temperature is sufficient, it's likely that the freezer temperature is set too low. Adjust the freezer temperature to a warmer setting and check.
  • R
    Rachel SmithAug 31, 2025
    Why is my Beko FN 126400 S running for a long time?
    • T
      twilliamsAug 31, 2025
      Your Beko Freezer might be running frequently or for a long time because a new product may be wider than the previous one or the room temperature may be high. It's normal for the freezer to operate longer in hot environments or after being recently plugged in or loaded with food. Avoid putting hot food inside and ensure the doors aren't opened frequently or left ajar. Also, check if the doors are closed completely and that the temperature isn't set too low. A soiled, worn out, broken, or improperly seated door seal can also cause this issue; try cleaning or replacing it.
  • N
    Nicholas WebbSep 3, 2025
    Why is there condensation on the side of my Beko FN 126400 S?
    • R
      Ryan VelezSep 3, 2025
      If you notice condensation on the side wall of your Beko Freezer's fridge compartment, it could be due to several reasons. The ambient temperature might be too cold; avoid placing the freezer in areas where the temperature drops below 10 °C. Frequent opening of the door or high humidity can also cause condensation, so minimize how often you open the door and avoid humid locations. Additionally, ensure food containing liquid is stored in closed containers, the door is properly closed, and the thermostat isn't set too cold.
  • J
    Jennifer RussellSep 7, 2025
    How to fix a Beko FN 126400 S Freezer door that is not closing?
    • M
      Maria MorrisSep 7, 2025
      If the door of your Beko Freezer isn't closing properly, it might be due to food packages obstructing the door. Try rearranging these packages. Additionally, ensure the freezer is level on the floor by adjusting the feet. If the floor itself isn't level or strong enough, make sure to correct that as well.
  • C
    Christina OdonnellSep 10, 2025
    What to do if crispers are stuck in Beko FN 126400 S Freezer?
    • J
      Jonathan FrancisSep 12, 2025
      If the crispers in your Beko Freezer are stuck, it's likely that food is touching the ceiling of the drawer. Rearrange the food items within the drawer to resolve this issue.

Summary

Important Safety Warnings

Intended Use and General Safety

Defines suitable environments and essential safety guidelines for appliance operation.

Installation and Setup

Relocation, Placement, and Environment

Guidelines for moving, selecting a location, and ensuring proper ambient conditions.

Electrical Connection and Safety

Proper hookup procedures and electrical safety requirements for the appliance.

Preparation for First Use

Initial Setup and Environment Checks

Ensuring correct installation location and ambient temperature for optimal performance.

Operating Your Appliance

Key Functions: Freezing and Temperature Control

Details on Quick Freeze, Freezer Set, and temperature indicators for optimal food preservation.

Maintenance and Cleaning

Troubleshooting Common Issues

Appliance Operation and Compressor Faults

Solutions for the refrigerator not operating, compressor issues, and extended running times.

Beko FN 126400 S Specifications

General IconGeneral
Energy Efficiency ClassF
Noise Level40 dB
Appliance placementFreestanding
Door hingeRight
Reversible doorsYes
Climate classSN-T
Defrosting SystemManual
Star rating4 Star
TypeUpright Freezer

Related product manuals