What to do if my Beko FN 126400 does not operate?
If your Beko Freezer isn't operating, start by ensuring the plug is securely inserted into the socket. Then, check the fuse of the socket your freezer is connected to, as well as the main fuse, to see if they have blown. Also ensure that the correct temperature value is set. If there was a power outage, the freezer should return to normal operation once the power is restored.
Why is the temperature in my Beko FN 126400 Freezer too high?
If the temperature in your Beko Fridge or Freezer is very high, it could be because the fridge temperature is adjusted to a very high value. Doors being opened frequently or left ajar for extended periods can also cause this. Ensure the door is completely closed. If the refrigerator was recently plugged in or loaded with food, allow it time to reach the set temperature. Avoid placing large amounts of hot food inside.
How to reduce noise from my Beko FN 126400 Freezer?
If your Beko Freezer is producing vibrations or noise, it might be because the floor is not level or stable. Try balancing the freezer by adjusting its feet and ensure the floor is strong enough to support it. The noise could also be due to items placed on top of the freezer; remove these items to see if the noise stops.
Why is my Beko FN 126400 Freezer fridge temperature too low?
If the fridge temperature in your Beko Freezer is very low while the freezer temperature is sufficient, it's likely that the fridge temperature is set too low. Adjust the fridge temperature to a warmer setting and check again.
Why is my Beko Freezer freezer temperature too low?
If the freezer temperature in your Beko Freezer is very low while the fridge temperature is sufficient, it's likely that the freezer temperature is set too low. Adjust the freezer temperature to a warmer setting and check.
Why is my Beko FN 126400 running for a long time?
Your Beko Freezer might be running frequently or for a long time because a new product may be wider than the previous one or the room temperature may be high. It's normal for the freezer to operate longer in hot environments or after being recently plugged in or loaded with food. Avoid putting hot food inside and ensure the doors aren't opened frequently or left ajar. Also, check if the doors are closed completely and that the temperature isn't set too low. A soiled, worn out, broken, or improperly seated door seal can also cause this issue; try cleaning or replacing it.
Why is there condensation on the side of my Beko Freezer?
If you notice condensation on the side wall of your Beko Freezer's fridge compartment, it could be due to several reasons. The ambient temperature might be too cold; avoid placing the freezer in areas where the temperature drops below 10 °C. Frequent opening of the door or high humidity can also cause condensation, so minimize how often you open the door and avoid humid locations. Additionally, ensure food containing liquid is stored in closed containers, the door is properly closed, and the thermostat isn't set too cold.
How to fix a Beko FN 126400 door that is not closing?
If the door of your Beko Freezer isn't closing properly, it might be due to food packages obstructing the door. Try rearranging these packages. Additionally, ensure the freezer is level on the floor by adjusting the feet. If the floor itself isn't level or strong enough, make sure to correct that as well.
What to do if crispers are stuck in Beko FN 126400 Freezer?
If the crispers in your Beko Freezer are stuck, it's likely that food is touching the ceiling of the drawer. Rearrange the food items within the drawer to resolve this issue.
General| Weight | 45 kg |
|---|---|
| Freezing capacity | 12 kg/24h |
| Climate class | SN-T |
| Freezer position | Upright |
| Number of drawers | 4 |
| No Frost system | Yes |
| Defrosting System | Automatic |
| Freezer net capacity | 126 L |
| Total Capacity | 126 liters |
Provides essential safety guidelines for operating and handling the appliance.
Instructions for connecting the appliance to the power supply safely.
Issues and solutions when appliance fails to start.
Troubleshooting compressor non-operation.
Reasons for extended refrigerator running times.
Fixes for excessively high internal temperatures.
Troubleshooting a door that does not close properly.
To Next Page
