Beko MWUX81282BI/IT - User Manual

Questions and Answers

M
Morgan LeeSep 4, 2025
Why does my Beko MWUX81282BI/IT Washer vibrate or make noise?
- W
  william52Sep 4, 2025
  Your Beko Washer may vibrate or make noise due to several reasons: * The machine might be unbalanced; adjust the feet to level it. * A hard substance may be in the pump filter; clean the pump filter. * Transportation safety bolts might not be removed; remove them. * The laundry quantity might be too little; add more laundry. * The machine might be overloaded; remove some laundry or distribute the load evenly. * The machine might be leaning on something; ensure it's not.
J
Jason SmithSep 18, 2025
Why does my Beko MWUX81282BI/IT machine directly discharges the water it takes in?
- S
  Stephanie GutierrezSep 18, 2025
  If your Beko Washer directly discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
N
Nathan GreenSep 16, 2025
Why does my Beko MWUX81282BI/IT washing performance is poor and clothes smell unpleasantly?
- J
  Jeremy EspinozaSep 16, 2025
  If your Beko Washer washing performance is poor and clothes smell unpleasantly, odours and bacteria layers may have formed on the drum due to continuous washing at lower temperatures and/or in short programmes. Leave the detergent drawer and loading door ajar after each washing.
M
Mallory SerranoSep 14, 2025
Why does my Beko Washer washing performance is poor and oily stains appeared on the laundry?
- A
  angelawigginsSep 15, 2025
  If your Beko Washer washing performance is poor and oily stains appeared on the laundry, this may be because regular drum cleaning is not applied. Clean the drum regularly.
S
Shane FranklinSep 12, 2025
Why does my Beko MWUX81282BI/IT Washer have too much foam?
- C
  Cindy MedinaSep 13, 2025
  Too much foam in your Beko Washer may be due to: * Using improper detergents for the washing machine; use appropriate detergents. * Using an excessive amount of detergent; use only a sufficient amount. * Storing detergent under improper conditions; store it in a closed, dry location. * Some meshed laundry may foam too much; use smaller amounts of detergent for these items.
M
moyerarthurSep 12, 2025
Why does my Beko Washer programme time not countdown?
- M
  Michael KellerSep 12, 2025
  If the programme time on your Beko Washer isn't counting down, it could be because: * The timer may stop during water intake until the machine takes in adequate water. * The timer may stop during the heating step until the machine reaches the selected temperature. * The timer may stop during the spinning step because the automatic unbalanced load detection system might be activated due to unbalanced laundry distribution.
P
perezphillipSep 9, 2025
Why does my Beko MWUX81282BI/IT Washer program does not start after closing the door?
- A
  annaschultzSep 9, 2025
  If the program on your Beko Washer does not start after closing the door: * Ensure you have pressed the Start / Pause / Cancel button. * If the loading door is difficult to close, you may have overloaded the machine; reduce the amount of laundry and ensure the door is closed properly.
C
christopherclarkSep 7, 2025
Why does my Beko MWUX81282BI/IT Washer washing performance is poor and stains persist or the laundry is not whitened?
- R
  Richard FarrellSep 7, 2025
  If your Beko Washer washing performance is poor, stains persist, or laundry isn't whitened, it could be due to: * Using insufficient detergent; use the recommended amount. * Overloading the machine; do not load excessively. * Selecting the wrong programme and temperature; select the proper settings. * Using the wrong type of detergent; use original detergent. * Using too much detergent; put the detergent in the correct compartment.
R
Reginald SimpsonSep 5, 2025
Why does my Beko Washer have poor washing performance and laundry turns gray?
- A
  Anthony ChavezSep 5, 2025
  If your Beko Washer's washing performance is poor and laundry turns gray, it could be due to: * Using an insufficient amount of detergent over a long period; use the recommended amount. * Washing at low temperatures for a long time; select the proper temperature. * Using insufficient detergent with hard water; use the recommended amount. * Using too much detergent; use the recommended amount.
M
michellethomasAug 21, 2025
What to do if my Beko MWUX81282BI/IT Washer does not drain water?
- A
  Adam FosterAug 21, 2025
  If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted; try cleaning or flattening it. Also, the pump filter might be clogged; clean the pump filter.

Summary

General Safety Instructions

Life and Property Safety

Safety instructions for preventing injuries and material damage during product use.

Childrens Safety

Guidelines to ensure children's safety around the washing machine and its operation.

Electrical Safety

Precautions regarding the electrical connection, grounding, and safe use of the appliance.

Hot Surface Safety

Warning about hot surfaces during operation and advising to keep children away.

Important Instructions for Environment

Compliance with WEEE Directive

Product compliance with EU WEEE Directive for waste electrical and electronic equipment.

Package Information

Information regarding the recyclability of product packaging materials.

Intended Use

Technical Specifications

Installation

Instructions and guidelines for the proper installation of the washing machine.

Preparation

Steps and advice for preparing laundry and the machine before washing.

Operating the Product

Guidance on using the control panel, selecting programmes, and operating functions.

Maintenance and Cleaning

Procedures for routine cleaning and maintenance of the washing machine's components.

Troubleshooting

Disclaimer; Warning

Self-Repair

Guidelines and warnings regarding self-repair of the washing machine and authorized parts.

Beko MWUX81282BI/IT Specifications

General

Appliance placement	Built-in
Loading type	Front-load
Product colour	White
Built-in display	Yes
Control type	Rotary, Touch
Drum material	Stainless steel
Rated capacity	8 kg
Maximum spin speed	1200 RPM
Spin-drying class	B
Washing class	A
Delay start	Yes
Delayed start time (max)	24 h
Energy efficiency class	C
Water consumption per cycle	47 L
Noise emission class	B
Noise level (spin)	72 dB
Width	60 cm
Noise Level (Washing)	52 dB
Noise Level (Spinning)	72 dB
Weight	68 kg
Depth	55 cm
Height	82 cm
Water Consumption	47 L
Programs	Synthetics