How to clean stains on the Beko Iron base?
If there are stains on the base, wipe the sediments and residues with a lightly dampened cloth after the appliance has cooled down adequately. The stains may be caused by ironing wet clothes or scale stains.
What to do if my Beko Iron does not produce steam?
First, ensure that the water reservoir is filled to the MAX line. Next, check that the water reservoir is correctly installed in its housing. Also, make sure the temperature setting is at “••”, “•••” or “MAX” position, as the iron will not produce steam at the “•” setting.
Why is my Beko SGA8328B Iron base not heating up?
There may be a connection issue; check the plug and the power cord. Also, make sure to press the on/off button. If it still doesn't work after checking these, contact the authorized service.
Why does my Beko SGA8328B leave sediments on clothes?
Sediments may occur if the water you use is too calcareous. Fill the water reservoir by mixing tap water and drinking water for your next ironing.
Why is the ' ' symbol flashing on the Beko SGA8328B Iron control panel?
The flashing symbol indicates that it is time to perform the descaling operation.
What to do if the on/off button of my Beko Iron flashes?
The appliance may have switched to auto off mode. Press the on/off button to resolve this.
Why does my Beko SGA8328B Iron drip water on the cloth?
Water may drip if you press the steam trigger before the iron reaches the set temperature. Wait until the iron is being prepared symbol in the control panel turns off completely before using the steam function.
To Next Page
General
