Beko WKD 23560 R - User Manual

Questions and Answers

I
ilaneSep 4, 2025
Why does my Beko Washer keep spinning and the timer isn't working?
- C
  Cody RussellSep 4, 2025
  If your Beko Washer is continuously spinning and the remaining time isn't counting down, the automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. The laundry in the drum may be clustered (bundled laundry in a bag). Laundry should be rearranged and re-spun. No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.
D
diana68Sep 18, 2025
Why is my Beko Washer not working and no lights are on?
- C
  Carrie GibsonSep 18, 2025
  If your Beko Washer isn't working and no lights are on, check if the plug is properly inserted into the mains outlet. Also, verify if the fuse has blown and whether there's an electricity cut-off. Finally, ensure that the “On/Off” button has been pressed.
D
Darrell ReeseSep 16, 2025
Why are the washing and start/pause lights flashing on my Beko WKD 23560 R?
- O
  ojonesSep 16, 2025
  If the “Washing” and "Start/ Pause/Cancel" lights are flashing on your Beko Washer after starting a program, it indicates that the water may have been cut off. Ensure that the water is not cut off, and then restart your machine by pressing the "Start/Pause/Cancel" button for a short time.
J
John StoneSep 14, 2025
Why is water immediately discharged from my Beko WKD 23560 R?
- S
  Sheila MiddletonSep 14, 2025
  If the water being taken into your Beko Washer is immediately discharged, it's likely due to an improper position of the drain hose. Connect the water draining hose as described in the operation manual.
R
Roger TurnerSep 12, 2025
Why are clothes stiff after washing in my Beko WKD 23560 R?
- H
  Holly MosleySep 13, 2025
  If your clothes are stiffening after washing in your Beko Washer, it could be due to using an insufficient amount of detergent, especially if the water hardness is high. Use an appropriate amount of detergent according to the water hardness.
Z
Zachary ThompsonSep 12, 2025
Why is there detergent residue in my Beko WKD 23560 R Washer dispenser?
- J
  Jerry JonesSep 12, 2025
  If you notice detergent residue in the dispensing drawer of your Beko Washer, it might be because the detergent was put in a wet dispenser drawer, so dry the drawer before adding detergent. It's also possible the detergent got damp, so store it in a closed, dry place away from high temperatures. The detergent in the main wash compartment might have gotten wet while taking in the prewash water. The detergent dispenser outlet (holes) may have a problem. There might be problems with the detergent dispenser valves.
C
Christopher ObrienSep 9, 2025
How to get rid of bad odor in my Beko WKD 23560 R Washer?
- S
  Scott GaySep 9, 2025
  If your Beko Washer has a bad odor, it could be due to oily accumulations on the drum. To resolve this, the machine must be operated empty either at 60°C or 90°C program with detergent every 6 months.
P
Pamela SmithSep 7, 2025
Why does my Beko Washer keep washing and the timer is not counting down?
- C
  Carl BradleySep 7, 2025
  If your Beko Washer is continuously washing and the remaining time isn't counting down, especially if the countdown is paused while taking in water, the machine is waiting until it's filled with the correct amount of water. It does this to avoid poor washing results due to lack of water. Once sufficient water is present, the timer will start counting down.
T
Tamara LopezSep 5, 2025
Why are there oily stains on clothes after washing in my Beko WKD 23560 R Washer?
- K
  Kelly ZhangSep 5, 2025
  If oily stains are appearing on your laundry after washing in your Beko Washer, it could be due to oily accumulations on the drum. These can result from continuous washing at lower temperatures or in short programs. To prevent this, leave the detergent dispenser drawer and the loading door ajar after each washing to avoid a humid environment. Also, operate the machine empty at 60°C or 90°C with detergent every 6 months.
R
Ronald HansenAug 20, 2025
Why my Beko Washer does not fill with water?
- E
  edwardjonesAug 21, 2025
  If your Beko Washer isn't filling with water, there are several potential causes. First, ensure that the inlet water taps are fully open. The water inlet hose might be bent, so straighten it. Also, the water inlet filter might be clogged and require cleaning. Finally, make sure the door is completely closed.