What to do if my Beko WM 5140 S does not drain water?
If your Beko Washer is not discharging water, the water outlet hose might be clogged or twisted, so you should clean or straighten it. Also, the pump filter may be clogged, so you should clean it.
How to unlock my Beko WM 5140 S Washer when it won't start?
If your Beko Washer won't start or you can't select a program, it might be in self-protection mode due to an infrastructure issue like line voltage or water pressure problems. To reset it, press and hold the “Start/Pause/Cancel” button for 3 seconds.
Why is my Beko Washer not filling with water?
If your Beko Washer isn't filling with water, start by fully opening the inlet water taps. Next, check the water inlet hose to make sure it isn't bent and straighten it if necessary. Also, the water inlet filter might be clogged, so clean it. Finally, ensure that the door is completely closed.
What to do if my Beko Washer is leaking from the bottom?
If you see water coming from the bottom of your Beko Washer, check the seals of the water inlet hoses to ensure they are securely fitted. Also, make sure the drain hose is tightly attached to the waste pipe or sink, and verify that the pump filter is completely closed.
Why does my Beko Washer keep spinning and not stopping?
If your Beko Washer continuously spins and the remaining time doesn't count down, it's likely due to an imbalance of laundry in the machine. The automatic spin correction system might have been activated. To resolve this, rearrange the laundry and re-spin.
Why is my Beko Washer not rinsing properly?
If your Beko Washer isn't rinsing well, the issue might be with the detergent. Ensure the amount, brand, and storage conditions of the detergent are appropriate, storing it in a closed and dry place away from high temperatures. Also, check that the detergent is put in the correct compartment. The machine filter may be clogged, so check it. The drain hose may be folded, so check the drain hose. Finally, intermediate spins may be skipped due to an imbalance of laundry in the machine, so rearrange the laundry and re-spun.
Why does my Beko Washer take so long to wash?
If your Beko Washer is taking longer than expected to wash, it could be due to several reasons. The water pressure might be low, causing the machine to wait until there's enough water to avoid poor washing. Similarly, a low supply voltage or a low input water temperature can also extend the cycle time. An imbalance of laundry can also cause this, as the machine activates an automatic spin correction system, so rearrange the laundry and re-spin. Finally, the number of rinses or the amount of rinse water might have increased to ensure a better rinse.
Why didn't my Beko WM 5140 S Washer spin the clothes?
If your Beko Washer didn't spin, it could be due to an imbalance of laundry in the machine, which may cause the program to complete without spinning. In this case, rearrange the laundry and re-spin. Also, the machine will not spin if the water has not completely drained. Check the filter and the drain hose.
Why is my Beko WM 5140 S not turning on?
If your Beko Washer does not work and no light is on, check if the plug is properly plugged into the mains outlet. Also, check the fuse and ensure electricity is not cut off. Finally, make sure the “On/Off” button has been pressed.
Why won't the timer count down on my Beko WM 5140 S Washer?
If your Beko Washer continuously washes and the remaining time doesn't count down, it could be due to a few reasons. If the countdown is paused while taking in water, the timer will not start until the machine is filled with the correct amount of water. If the countdown is paused at the spinning step, there may be an imbalance of laundry in the machine. In this case, rearrange the laundry and re-spun.
General| Type | Freestanding |
|---|---|
| Capacity | 5 kg |
| Energy Efficiency Class | A+ |
| Spin Speed | 1400 rpm |
| Dimensions (H x W x D) | 85 x 60 x 45 cm |
Crucial advice and symbols explanation before operating the washing machine.
Details the machine's components, diagrams, and technical specifications.
Covers general safety, first use, intended use, and safety for households with children.
Ensures safe electrical hookup, including grounding and cable checks.
Step-by-step guide for removing packaging, positioning, and leveling the machine.
Instructions for connecting water supply and drain hoses securely.
Guidelines for safely destroying packaging and disposing of the old machine.
Steps for sorting laundry, preparing clothes, and understanding load capacity.
Information on detergent drawer compartments, types, and quantities.
Guide to the control panel, turning on, program selection, and spin speed.
Details on using functions like Pre-wash, Time Save, Extra Rinse, and others.
How to change programs, modify settings mid-cycle, and manage time delay.
Instructions for adding/removing laundry, child-proof lock, and canceling programs.
Concise steps for daily preparation, starting, canceling, and adding laundry.
Guides for cleaning the detergent drawer, drum, exterior, and inlet filters.
Procedures for draining water and cleaning the pump filter.
Identifies common problems and provides solutions for machine operation.
Information on what is covered, not covered, and important notes for the product guarantee.
Contact details and procedures for obtaining service during and after the guarantee period.
To Next Page
