Beko WM 6133 S - User Manual

36 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

WM 6143 S

WM 6133 W

WM 6143 W

WM 6133 S

Automatic

washing machine

Table of Contents

Questions and Answers

J
Jose WilliamsSep 8, 2025
Why is there detergent residue in the dispensing drawer of my Beko WM 6133 S?
- B
  bjensenSep 8, 2025
  Detergent residue in the dispensing drawer of your Beko Washer may be due to putting detergent in a wet dispenser drawer; dry the drawer before adding detergent. The detergent may have gotten damp, so store it in a closed, dry place away from high temperatures. The detergent in the main wash compartment might have gotten wet while taking in the prewash water, indicating a problem with the dispenser outlet or valves. Also, detergent might be mixed with the bleaching agent, softener should not come into contact with detergent when being added.
K
Kelly WelchAug 23, 2025
Why doesn't my Beko Washer rinse well?
- G
  George JeffersonAug 23, 2025
  If your Beko Washer doesn't rinse well, the issue could be related to the detergent you're using: the amount, brand, or storage conditions might not be appropriate, so store detergent in a closed and dry place, away from high temperatures. Detergent might have been put in the wrong compartment; if detergent is put in the prewash compartment although prewash cycle is not selected, the machine can take this detergent during rinsing or softener step. The machine filter may be clogged, or the drain hose may be folded, so check these components. Also, intermediate spins may be skipped due to an imbalance of laundry; rearrange and re-spun the laundry.
V
Vanessa StevensAug 25, 2025
Why is there water coming from the bottom of my Beko WM 6133 S Washer?
- T
  Taylor BlackAug 26, 2025
  If you notice water leaking from the bottom of your Beko Washer, the issue might stem from the hoses or the pump filter. Start by confirming that the seals of the water inlet hoses are securely fitted. Then, ensure the drain hose is tightly attached to the waste pipe or sink. Finally, check that the pump filter is completely closed.
J
Jennifer ThomasAug 26, 2025
How to fix a Beko WM 6133 S that does not discharge water?
- E
  Elizabeth FrancoAug 26, 2025
  If your Beko Washer isn't discharging water, the problem could be a clogged or twisted water outlet hose; in this case, clean or straighten the hose. Alternatively, the pump filter might be clogged; clean the pump filter to resolve this.
P
parksdustinAug 27, 2025
What to do if my Beko WM 6133 S did not spin?
- M
  Michael WillisAug 27, 2025
  If your Beko Washer didn't spin, it could be due to an imbalance of laundry in the machine, which activates the automatic spin correction system. Rearrange and re-spin the laundry to resolve this. Also, the machine won't spin if the water hasn't completely drained, so check the filter and the drain hose.
A
Alec BrownSep 22, 2025
How to fix Beko WM 6133 S Washer when program cannot be started or selected?
- J
  jlyonsSep 22, 2025
  The Beko Washer may have switched to self-protection mode due to an infrastructure problem (such as line voltage, water pressure, etc.). Reset your machine by pressing the “Start/Pause/ Cancel” button for 3 seconds.
B
Brandon MartinezSep 16, 2025
Why do oily stains appear on laundry after washing in my Beko Washer?
- S
  Sheryl RogersSep 16, 2025
  Oily stains appearing on laundry after washing in your Beko Washer may be due to oily accumulations on the drum. Such odors and bacteria layers may be formed on the drum as a result of continuous washing at lower temperatures and/or in short programs. Leave the detergent dispenser drawer as well as the loading door of the machine ajar after each washing to prevent a humid environment. Operate the machine empty at 60°C or 90°C with detergent every 6 months.
S
srichSep 18, 2025
Why did my Beko Washer stop shortly after the program started?
- C
  charlesloweSep 18, 2025
  Your Beko Washer may have stopped temporarily due to low voltage. It will resume operating when the voltage is back to the normal level.
J
Jennifer WatsonSep 7, 2025
Why does my Beko WM 6133 S Washer continuously wash and the remaining time doesn't count down?
- M
  Mr. Roger ReynoldsSep 7, 2025
  If your Beko Washer continuously washes and the remaining time doesn't count down, it could be due to a paused countdown while the machine is taking in water. The timer won't count down until the machine is filled with the correct amount of water to avoid poor washing results due to lack of water. The countdown may also pause at the heating step until the selected temperature is reached, or at the spinning step due to an imbalance of laundry in the machine. In the latter case, rearrange the laundry and re-spin.
T
Timothy BakerSep 4, 2025
Why is there too much foam in my Beko Washer?
- M
  Mr. Andrew LynchSep 4, 2025
  Excessive foam in your Beko Washer may be due to using the wrong detergent; use only detergents specifically designed for automatic washing machines. You might be using too much detergent, even more if you're washing a small load of lightly soiled laundry, so reduce the amount. Improperly stored detergent can also cause this issue, so store it in a closed, dry location away from heat. The type of material being washed, like lace, can also contribute to excessive foam; use less detergent for these items. Finally, ensure you're not putting detergent in the prewash compartment when a prewash cycle isn't selected.

Summary

Explanation of Symbols

Warnings

General Safety

Provides essential safety precautions to prevent injury and appliance damage.

Installation

Connecting to the Water Supply

Detailed instructions for securely connecting the washing machine to the water source.

Selecting a Program and Operating Your Machine

Program Selection

Guide to choosing the correct washing program based on laundry type and needs.

Troubleshooting

Beko WM 6133 S Specifications

General

Brand	Beko
Model	WM 6133 S
Category	Washer
Language	English

Related product manuals

Preview: Beko WM 5140 S

Preview: Beko WM 5100 S

Preview: Beko WM 6103 W

Preview: Beko WM 74125W