What to do if my Beko WME 7267 S doesn't fill with water?
If your Beko Washer isn't filling with water, several issues could be the cause. The tap might be turned off, the water inlet hose could be bent, the water inlet filter might be clogged, or the loading door may be ajar. Here’s how to troubleshoot: - Open the inlet water taps fully. - Flatten the water intake hose. - Clean the water intake filter. - Close the loading door.
How to fix a Beko WME 7267 S leaking water from the bottom?
If water is coming from the bottom of your Beko Washer, it could be due to problems with the hoses or the pump filter. Check the following: - Make sure the seals of the water inlet hoses are securely fitted. - Tightly attach the drain hose to the tap. - Make sure the pump filter is completely closed.
Why doesn't my Beko WME 7267 S Washer discharge water?
If your Beko Washer isn't discharging water, the water outlet hose might be clogged or twisted, or the pump filter may be clogged. To fix this: - Clean or flatten the hose. - Clean the pump filter.
How to reset Beko Washer after self-protection mode?
To bring your Beko Washer to factory settings after it has switched to self-protection mode due to an infrastructure problem, turn the program selection knob as described in the section 'Ending the program through canceling'.
Why is my Beko WME 7267 S vibrating and shaking?
Your Beko Washer might be vibrating or shaking due to several reasons. Ensure the machine feet are adjusted properly, and the transportation safety bolts have been removed. It could also be due to a small amount of laundry, overloading, unevenly distributed clothes, or the machine touching a solid surface. To resolve this: - Adjust the machine feet. - Remove the transportation safety bolts. - Add more laundry or reduce the amount, balancing the load by hand. - Ensure nothing touches the machine.
How to improve stain removal in my Beko Washer?
If your Beko Washer isn't effectively removing stains or whitening laundry, it could be due to several factors. You might be using an insufficient amount of detergent, overloading the machine, selecting the wrong program and temperature, or using the wrong type of detergent. To improve washing performance: - Use the recommended amount of detergent appropriate for the laundry. - Do not load the machine in excess. - Select the proper program and temperature for the laundry to be washed. - Put the detergent in the correct compartment. - Do not mix detergent with bleaching agents.
Why does washing time take longer than specified on my Beko WME 7267 S Washer?
If the washing time on your Beko Washer is longer than specified, it could be due to low water pressure, low supply voltage, low input water temperature, or an imbalance of laundry in the machine. Also, the number of rinses or amount of rinse water might have increased. The machine adjusts the washing time to ensure proper cleaning. For example, it waits for sufficient water, extends time with low voltage, and heats water when it's cold. The automatic spin correction system might also be activated because of unbalanced laundry.
Why does laundry turn grey after washing in my Beko WME 7267 S Washer?
If your laundry turns grey after washing in your Beko Washer, it could be due to using an insufficient amount of detergent for a long time, washing at low temperatures for a long time, using insufficient detergent for hard water, or using an excessive amount of detergent. Use the recommended amount of detergent appropriate for water hardness and the laundry. Select the proper temperature for the laundry to be washed. If the water hardness is high, using an insufficient amount of detergent can cause laundry to turn grey over time. It is difficult to eliminate such greyness once it occurs.
What to do if my Beko Washer continuously spins and the remaining time doesn't count down?
If your Beko Washer continuously spins and the remaining time doesn't count down, there may be an imbalance of laundry in the machine. The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. The laundry in the drum may be clustered (bundled laundry in a bag). Laundry should be rearranged and re-spun. No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.
What to do if my Beko WME 7267 S Washer stops shortly after the program starts?
Your Beko Washer might stop temporarily due to low voltage and will resume operating when the voltage is back to the normal level. Also, make sure that you connect the water draining hose as described in the operation manual and use the recommended amount of detergent appropriate for water hardness and the laundry.
Identifies and labels the main parts of the washing machine.
Provides essential safety precautions for operating the washing machine.
Guides the user through the initial setup and first wash cycle.
Specifies the intended use and limitations of the appliance.
Details safety precautions related to electrical connection and general hazards.
Advises on precautions to protect children from the appliance.
Instructions on how to remove packaging reinforcement before installation.
Guides on removing transportation safety bolts before operation.
Advises on selecting a suitable and stable location for the machine.
Details how to adjust the machine's feet for level placement.
Advises on safe disposal of packaging materials.
Instructions on how to dispose of the old appliance responsibly.
Guidance on sorting laundry by fabric, color, and soiling level.
Tips on preparing clothes, like removing metal items and closing zippers.
Explains how to determine the correct laundry load for optimal results.
Advice on selecting appropriate detergents for different fabrics.
Guidance on using the correct amount of detergent.
Identifies and describes the buttons and display on the control panel.
Details the primary washing programs like Cottons and Synthetics.
How to modify the set time delay before it starts.
Steps to cancel a set time delay and start immediately.
Indicates when the softener step begins.
Indicates when the spin cycle begins or is active.
How to put the machine into standby mode.
Allows adding or removing laundry when the machine is in standby.
Steps to prepare the machine before starting a wash cycle.
Step-by-step guide to starting a wash program.
How to cancel an active washing program.
Instructions on adding laundry during or after a program starts.
Explains rinse hold mode and options to proceed.
How to re-spin laundry due to unbalanced load detection.
Instructions for cleaning the detergent dispenser drawer.
How to check and clean the door seal and drum.
Guidance on cleaning the machine's exterior.
How to locate and clean the inlet water filters.
General| Load Capacity | 7 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Number of Programs | 15 |
| Noise Level (Spinning) | 76 dB |
To Next Page
