What to do if water comes from the bottom of my Beko WME 8227 W Washer?
If you notice water coming from the bottom of your Beko Washer, it might indicate problems with the hoses or the pump filter. Ensure that the seals of the water inlet hoses are securely fitted, tightly attach the drain hose to the tap, and verify that the pump filter is completely closed.
What to do if my Beko WME 8227 W does not fill with water?
If your Beko Washer isn't filling with water, the tap may be turned off, the water inlet hose might be bent, the water inlet filter might be clogged, or the loading door may be ajar. Ensure that the inlet water taps are fully open, flatten the water intake hose, clean the water intake filter, and close the loading door.
How to fix a Beko Washer that does not discharge water?
If your Beko Washer isn't discharging water, the water outlet hose might be clogged or twisted, or the pump filter may be clogged. Try cleaning or flattening the hose and cleaning the pump filter.
Why is my Beko WME 8227 W Washer vibrating or shaking?
Your Beko Washer might be vibrating or shaking due to several reasons: the machine feet might not be adjusted properly, the transportation safety bolts might not have been removed, there may be too little laundry, the machine may be overloaded or the clothes may be distributed unevenly, or the machine might be touching a solid surface. To resolve this, try adjusting the machine feet, removing the transportation safety bolts, adding more laundry, reducing the amount of laundry or balancing the load by hand, and ensuring that nothing touches the machine.
Why does my Beko Washer stop shortly after the program starts?
Your Beko Washer might stop temporarily due to low voltage. It will resume operating when the voltage is back to the normal level.
Critical safety rules for operation, installation, and general handling.
Detailed safety precautions related to electrical, water, and operational hazards.
Essential guidelines for safely connecting the appliance to the mains power supply.
Advice on choosing a suitable location and leveling the machine.
Instructions for connecting the water inlet and drain hoses securely.
Further details and compliance requirements for electrical hookup.
Steps to start a cycle and how to track its progress.
Steps for draining residual water and cleaning the pump filter.
Troubleshooting steps for issues with program initiation and water filling/draining.
Solutions for problems like vibration, stopping, and water discharge errors.
Troubleshooting common problems related to the door, spinning, and program timing.
Addressing issues with spinning, poor stain removal, and cleaning effectiveness.
Solutions for oily stains, odors, faded colors, stiff clothes, and poor rinsing.
Troubleshooting steps when the machine shows no display or fails to start.
General| Load Capacity | 8 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Number of Programs | 15 |
| Noise Level (Spinning) | 76 dB |
| Color | White |
| Energy Efficiency Class | A+++ |
To Next Page
