What to do if my Beko WMY 111444 LB1 Washer does not fill with water?
If your Beko Washer isn't filling with water, check if the tap is turned on. Also, inspect the water inlet hose for any bends and flatten it if necessary. The water inlet filter might be clogged, so clean it. Ensure the loading door is completely closed.
Why is my Beko WMY 111444 LB1 leaking water from the bottom?
If you notice water leaking from the bottom of your Beko Washer, the water drain hose might be clogged or twisted; clean or flatten it. Alternatively, the pump filter could be clogged, so clean the pump filter.
How to fix a Beko WMY 111444 LB1 that does not drain water?
If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted, so clean or flatten it. Also, the pump filter could be clogged, so clean the pump filter.
Why is there detergent residue in the detergent drawer of my Beko WMY 111444 LB1 Washer?
Detergent residue in your Beko Washer's drawer can occur for several reasons. Ensure the detergent drawer is dry before adding detergent. The detergent might have gotten damp, so keep detergents closed in a humidity-free environment and avoid excessive temperatures. Check the water pressure. If the holes of the detergent compartment are blocked, clean them. There may be a problem with the detergent drawer valves. Regular drum cleaning may not be applied.
Why is my laundry still wet after the Beko WMY 111444 LB1 Washer cycle ends?
If laundry remains wet, excessive foam might have occurred, and the automatic foam absorption system might have been activated due to too much detergent usage. Use the recommended amount of detergent.
What to do if the program cannot be started on Beko WMY 111444 LB1?
If the program cannot be started on your Beko Washer, it may have switched to self-protection mode due to a supply problem such as line voltage or water pressure issues. Press and hold the Start / Pause / Cancel button for 3 seconds to reset the machine to factory settings.
How to reduce excessive foam in my Beko WMY 111444 LB1?
Excessive foam in your Beko Washer can be due to several factors. You might be using improper detergents, so switch to detergents appropriate for washing machines. Reduce the amount of detergent used. Ensure detergent is stored properly, in a closed and dry location, away from excessive heat. If washing meshed laundry like tulle, use less detergent. Make sure the detergent is placed in the correct compartment. If the softener is being taken early, there may be a problem in the valves or in the detergent dispenser.
Why is my laundry stiff after washing in my Beko Washer?
Laundry can become stiff after washing in your Beko Washer for a few reasons. Using insufficient detergent for the water hardness can cause this, so use an appropriate amount. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step, so put the detergent in the correct compartment. Avoid mixing softener with detergent, and clean the dispenser with hot water.
Why doesn't my laundry smell like softener after using my Beko WMY 111444 LB1 Washer?
If your laundry doesn't smell like softener after washing in your Beko Washer, it could be because the detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water and put the detergent in the correct compartment. Another reason might be that the detergent is mixed with the softener, so do not mix the softener with detergent and clean the dispenser with hot water.
What to do if my Beko WMY 111444 LB1 stopped shortly after starting?
If your Beko Washer stopped temporarily due to low voltage, it will resume running when the voltage restores to the normal level.
Safety instructions to prevent injuries and material damage risks.
Safety guidelines for children interacting with the appliance.
Safety precautions related to electrical connections and usage.
Warning about hot surfaces during operation.
Instructions and procedures for installing the washing machine.
Detailed instructions for connecting the water supply hoses.
Guidance on properly connecting the drain hose.
Steps for leveling the machine and making a safe electrical connection.
Guidance on selecting and using detergents and softeners.
General| Door hinge | - |
|---|---|
| Drum volume | 72 L |
| Display type | LCD |
| Loading type | Front-load |
| Product color | Gray |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Drum capacity | 11 kg |
| Delay start (max) | 24 h |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 76 dB |
| Noise level (wash) | 59 dB |
| Number of washing programs | 16 |
| Water consumption per cycle | - L |
| Energy consumption washing per cycle | - kWh |
| Annual water consumption washing | 13200 L |
| Annual energy consumption washing | 233 kWh |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 600 mm |
| Height | 840 mm |
| Weight | 84000 g |
To Next Page