39 / EN
Washng Machne / User’s Manual
Problem Reason Soluton
Detergent residue in the
detergent drawer. (**)
Detergent s put n wet drawer.
• Dry the detergent drawer before
puttng n detergent.
Detergent has gotten damp.
• Keep detergents closed n an
envronment free of humdty and
do not expose them to excessve
temperatures.
Water pressure s low.
• Check the water pressure.
The detergent n the man wash compartment got
wet whle takng n the prewash water. Holes of
the detergent compartment are blocked.
• Check the holes and clean f they are
clogged.
There s a problem wth the detergent drawer
valves.
• Call the Authorzed Servce Agent.
Detergent mght be mxed wth the softener.
• Do not mx the softener wth
detergent. Wash and clean the
dspenser wth hot water.
Regular drum cleanng s not appled.
• Clean the drum regularly. For ths,
please see 4.7.2.
Too much foam forms in the
machine. (**)
Improper detergents for the washng machne are
beng used.
• Use detergents approprate for the
washng machne.
Excessve amount of detergent s used.
• Use only suffcent amount of
detergent.
Detergent was stored under mproper condtons.
• Store detergent n a closed and dry
locaton. Do not store n excessvely
hot places.
Some meshed laundry such as tulle may foam too
much because of ther texture.
• Use smaller amounts of detergent for
ths type of tem.
Detergent s put n the wrong compartment.
• Put the detergent n the correct
compartment.
Softener s beng taken early.
• There may be problem n the valves
or n the detergent dspenser. Call the
Authorzed Servce Agent.
Foam is overflowing from
the detergent drawer.
Too much detergent s used.
• Mx 1 tablespoonful softener and
½ l water and pour nto the man
wash compartment of the detergent
drawer.
• Put detergent nto the machne
sutable for the programmes and
maxmum loads ndcated n the
“Programme and consumpton table”.
When you use addtonal chemcals
(stan removers, bleachs and etc),
reduce the amount of detergent.