What to do if my Beko Washer doesn't drain?
If your Beko Washer doesn't drain water, the drain hose might be clogged or twisted, so try cleaning or flattening it. Also, the pump filter might be clogged; in this case, clean the pump filter as well.
Why is my Beko WTV8512XSW vibrating so much?
If your Beko Washer vibrates excessively or makes unusual noises, several factors could be responsible. Ensure the machine is level by adjusting the feet. Remove the transportation safety bolts if you haven't already. A hard substance in the pump filter could also be the culprit, so clean the pump filter. The laundry load might be unbalanced; try adding more laundry or redistributing the existing load evenly. Avoid overloading the machine. Finally, confirm that the machine isn't leaning against anything.
How to start Beko WTV8512XSW after closing the door?
If your Beko Washer isn't starting after you close the door, make sure you press the Start / Pause / Cancel button. Also, if you've loaded too much laundry, it can be difficult to close the door properly. Reduce the amount of laundry and ensure the door is securely closed.
Why is there too much foam in my Beko WTV8512XSW Washer?
If your Beko Washer is producing too much foam, it could be due to several reasons. You might be using detergents that aren't appropriate for washing machines, so switch to a suitable detergent. You could also be using too much detergent; reduce the amount you're using. Improper storage of detergent can also cause this issue, so store it in a closed, dry location, away from excessive heat. Finally, make sure you're putting the detergent in the correct compartment.
Why does my Beko WTV8512XSW Washer immediately discharge water?
If your Beko Washer discharges water as soon as it takes it in, the draining hose might not be at the correct height. Connect the water draining hose as described in the operation manual.
Safety measures for product placement, electrical safety, water connections, and door operation to prevent damage.
Guidelines for safe use by children, supervision requirements, and safe storage of packaging materials to prevent hazards.
Instructions for choosing an appropriate installation location and preparing the site, ensuring stability and accessibility.
Detailed overview of the control panel, explaining the purpose of each button and indicator light.
Guidance on selecting the correct wash programme and preparing the machine for operation.
Solutions for problems preventing programme start or selection, including door and protection mode issues.
Troubleshooting for water intake, drainage, and leakage issues, covering hoses, filters, and pump.
To Next Page
General
