Beko WTV 7533 XB User Manual (English)

Questions and Answers:

M
Michelle Brown PhDAug 21, 2025
What to do if the Beko Washer door won't open?
- J
  Jennifer JacksonAug 21, 2025
  If your Beko Washer's loading door won't open, it could be due to several reasons. The door lock might be activated because of the water level; try draining the water by running the Pump or Spin programme. The machine might be heating water or in the spinning cycle, so wait until the programme is complete. The child lock could be engaged; wait a few minutes for it to deactivate. Lastly, the door might be stuck due to pressure, so try pushing and pulling the door to release it.
M
Michael EvansAug 22, 2025
Why is my Beko WTV 7533 XB not draining?
- N
  Nancy MillerAug 22, 2025
  If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted, so clean or flatten the hose. Alternatively, the pump filter could be clogged, so clean the pump filter.
J
James CarpenterAug 25, 2025
Why is my Beko Washer leaking from the bottom?
- J
  James OwensAug 25, 2025
  If your Beko Washer is leaking water from the bottom, it could be due to a clogged or twisted water drain hose; clean or flatten the hose. Alternatively, the pump filter might be clogged; clean the pump filter.
J
Jeremy PowersAug 26, 2025
Why is my Beko Washer not filling with water?
- M
  Mrs. Jacqueline BerryAug 26, 2025
  If your Beko Washer isn't filling with water, start by checking if the tap is turned off and turn it on. Ensure the water inlet hose isn't bent and flatten it if it is. Also, check if the water inlet filter is clogged and clean it. Finally, make sure the loading door is closed properly.
S
Stephanie RodriguezAug 27, 2025
Why isn't my Beko WTV 7533 XB Washer rinsing properly?
- H
  Heather Smith MDAug 27, 2025
  If your Beko Washer doesn't rinse well, the amount, brand, and storage conditions of the detergent might be inappropriate. Use a detergent suitable for washing machines and your laundry, and keep detergents closed in a humidity-free environment. If detergent is put in the prewash compartment when prewash isn't selected, the machine might take it during rinsing. Put the detergent in the correct compartment. Additionally, check if the pump filter or drain hose is folded.
J
Jerry NashAug 29, 2025
Why won't my Beko WTV 7533 XB Washer go to the spin cycle?
- J
  Joshua SchultzAug 29, 2025
  If your Beko Washer is not switching to the spinning step, there might be an unbalanced load in the machine, triggering the automatic unbalanced load detection system. Also, the machine won't spin if water isn't drained completely, so check the filter and draining hose. Excessive foam from too much detergent can also prevent spinning, so use the recommended amount of detergent.
R
Ricardo AdamsAug 31, 2025
Why does my Beko WTV 7533 XB take so long?
- N
  Nicole MendozaAug 31, 2025
  If your Beko Washer is taking longer than specified in the manual, it could be due to several reasons. Low water pressure may cause the machine to wait until it takes in enough water, extending the wash time. Low voltage or low input water temperature can also prolong the washing time. Additionally, the machine may increase the amount of rinse water or add an extra rinsing step if needed. Excessive foam from too much detergent can also activate the automatic foam absorption system, lengthening the wash time.
Z
zacharyherreraSep 1, 2025
Why does my Beko WTV 7533 XB Washer immediately drain water?
- W
  william23Sep 1, 2025
  If your Beko Washer directly discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
L
Leslie DuranSep 3, 2025
Why is my Beko WTV 7533 XB turning clothes grey?
- H
  Henry SanchezSep 3, 2025
  If the washing performance of your Beko Washer is poor and laundry turns gray, it may be due to insufficient detergent used over a long period, so use the recommended amount of detergent. Washing at low temperatures for a long time can also cause this, so select the proper temperature. Using insufficient detergent with hard water can also cause graying. Alternatively, too much detergent may be the problem, so use the recommended amount.
O
owilliamsSep 5, 2025
Why is the timer not working on my Beko Washer?
- R
  Richard BryanSep 5, 2025
  If the programme time on your Beko Washer isn't counting down (on models with a display), the timer may stop during water intake until the machine takes in enough water. It may also stop during the heating step until the machine reaches the selected temperature. Additionally, the timer can stop during the spinning step if the automatic unbalanced load detection system is activated.

Beko WTV 7533 XB Specifications

General

Capacity	7 kg
Energy Efficiency Class	A+++
Dimensions (H x W x D)	84 cm x 60 cm x 49 cm
Weight	62 kg
Number of Programs	15
Water Consumption	45 L

Summary

General Safety Instructions

Life and Property Safety

Safety instructions to prevent injuries and material damage risks, covering floor placement, unplugging, authorized service, hose connections, and door operation.