What to do if my Beko WTV 7512 BW doesn't drain water?
If your Beko Washer isn't draining water, it could be due to a clogged or twisted water drain hose. Try cleaning or flattening the hose. Alternatively, the pump filter might be clogged, so clean the pump filter.
Why won't my Beko WTV 7512 BW start after I close the door?
If your Beko Washer program doesn't start after closing the door, it might be because the Start / Pause / Cancel button wasn't pressed. Press the Start / Pause / Cancel button. Also, if you've loaded too much laundry, it may be difficult to close the door properly, so reduce the amount of laundry and ensure the door is closed correctly.
Why is my Beko WTV 7512 BW not switching to the spinning step?
Your Beko Washer might not switch to the spinning step due to an unbalanced load. The automatic unbalanced load detection system may activate if the laundry is not distributed evenly in the drum. The machine also won't spin if water isn't drained completely, so check the filter and draining hose. Excessive foam from too much detergent can also prevent spinning, so use the recommended amount of detergent.
What to do if there is water leaking from the bottom of my Beko washing machine?
If you notice water leaking from the bottom of your Beko washing machine, the water drain hose might be clogged or twisted, so clean or flatten the hose. Alternatively, the pump filter might be clogged; in that case, clean the pump filter.
Why is there detergent residue in the detergent drawer of my Beko WTV 7512 BW?
Detergent residue in the drawer of your Beko Washer could be due to several reasons. The detergent drawer might have been wet when you added detergent, so dry the drawer before adding detergent. The detergent itself may have gotten damp, so keep detergents closed in a humidity-free environment and avoid excessive temperatures. Low water pressure could also be a factor, so check the water pressure. Also, check the holes of the detergent compartment and clean them if they are clogged.
Why is my Beko WTV 7512 BW Washer programme cannot be started or selected?
Your Beko Washer may have switched to self-protection mode due to a supply problem such as line voltage or water pressure issues. To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will then be canceled.
Why is there too much foam in my Beko Washer?
Excessive foam in your Beko Washer can occur if you're using improper detergents for the washing machine. Make sure to use detergents appropriate for washing machines. Using too much detergent or storing it improperly can also cause this issue, so use only a sufficient amount of detergent and store it in a closed, dry location. Some meshed laundry like tulle may also create too much foam, so use smaller amounts of detergent for these items. Ensure you are putting the detergent in the correct compartment.
Why is foam overflowing from the detergent drawer of my Beko Washer?
Foam overflowing from the detergent drawer of your Beko Washer is often due to using too much detergent. To resolve this, mix 1 tablespoonful of softener with ½ liter of water and pour it into the main wash compartment of the detergent drawer. Also, put detergent into the machine suitable for the programmes and maximum loads indicated in the "Programme and consumption table". When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.
Why does my Beko Washer vibrate so much?
Your Beko Washer might be vibrating or making excessive noise due to several reasons. The machine may be standing unbalanced, so adjust the feet to level it. A hard substance might have entered the pump filter, so clean the pump filter. Ensure that the transportation safety bolts are removed. The laundry quantity might be too little, so add more laundry. The machine could be overloaded, so take some laundry out or distribute it evenly. Finally, make sure the machine isn't leaning on anything.
Why is the washing performance of my Beko Washer poor and laundry turns gray?
Poor washing performance resulting in gray laundry when using your Beko Washer can stem from several factors. You might not be using enough detergent over a long period, so use the recommended amount for your water hardness and laundry load. Washing at low temperatures for too long or using the wrong program/temperature can also cause this, so select the proper settings. Insufficient detergent with hard water, using too much detergent, overloading the machine, or using the wrong type of detergent can also lead to this issue. Do not load the machine in excess. Load with amounts recommended in the "Programme and consumption table".
General| Type | Front Load |
|---|---|
| Capacity | 7 kg |
| Spin Speed | 1200 RPM |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 84 cm x 60 cm x 49 cm |
| Weight | 71 kg |
| Maximum Spin Speed | 1200 RPM |
| Number of Programs | 15 |
To Next Page
