Why doesn't the Beko WTV9633XC0 program start after closing the door?
The program on your Beko Washer might not start after closing the door because the Start / Pause / Cancel button was not pressed. Press the Start / Pause / Cancel button.
What to do if the program cannot be started on my Beko WTV9633XC0?
If a programme cannot be started or selected on your Beko Washer, it may have switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.). To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will be canceled.
Why doesn't my Beko WTV9633XC0 rinse clothes well?
If your Beko Washer isn't rinsing well, it could be due to: * Inappropriate detergent amount, brand, or storage. Use a detergent appropriate for washing machines and laundry; keep detergents closed in a humidity-free environment and avoid excessive temperatures. * Detergent in the wrong compartment. Put the detergent in the correct compartment. * A clogged pump filter. Check the filter. * A folded drain hose. Check the drain hose.
Why won't my Beko WTV9633XC0 Washer go to the spinning step?
Your Beko Washer might not switch to the spinning step because: * There might be an unbalanced load in the machine. The automatic unbalanced load detection system might be activated. * The machine will not spin if water is not drained completely. Check the filter and the draining hose. * Excessive foam might have occurred. Use the recommended amount of detergent.
Why is my Beko WTV9633XC0 leaking water from the bottom?
If you notice water leaking from the bottom of your Beko washing machine, it could be due to a clogged or twisted water drain hose. Clean or flatten the hose to fix this. Another possible cause is a clogged pump filter, which would also need cleaning.
How to open the loading door of my Beko WTV9633XC0 Washer?
The loading door of your Beko Washer might not open due to a few reasons: * The door lock is activated because of the water level in the machine. Drain the water by running the Pump or Spin programme. * The machine is heating up the water or it is at the spinning cycle. Wait until the programme completes. * The child lock is engaged. The door lock will be deactivated a couple of minutes after the programme has come to an end. Wait for a couple of minutes for deactivation of the door lock.
What to do if my Beko WTV9633XC0 does not drain water?
If your Beko Washer isn't draining water, it could be due to a clogged or twisted water drain hose. Clean or flatten the hose to resolve this. Alternatively, the pump filter might be clogged, so cleaning the pump filter could solve the problem.
Why doesn't my laundry smell like softener after washing in my Beko WTV9633XC0 Washer?
General| Model | WTV9633XC0 |
|---|---|
| Load Capacity | 9 kg |
| Energy Efficiency Class | A+++ |
| Noise Level Spinning | 76 dB |
| Programs | 15 |
| Weight | 70 kg |
| Color | White |
| Spin Speed | 1600 rpm |
| Type | Front Load |
To Next Page
