Why is foam overflowing from my Beko WY124PT44MW Washer detergent drawer?
If foam is overflowing from the detergent drawer of your Beko Washer, it's likely that too much detergent is being used. Mix 1 tablespoonful of softener with ½ l of water and pour it into the main wash compartment of the detergent drawer.
Why is my Beko WY124PT44MW Washer not taking in water?
If your Beko Washer isn't taking water in, first check if the tap is turned off and turn it on. The water inlet hose might be bent, so flatten it. The water inlet filter could be clogged, so clean the filter. Finally, ensure the loading door is closed properly.
What to do if my Beko WY124PT44MW Washer program won't start?
If your Beko Washer programs do not start after closing the loading door, ensure you press the Start / Pause / Cancel button. If the loading door is hard to close due to excessive loading, reduce the amount of laundry and ensure the door is closed properly.
Why are my clothes still wet after my Beko WY124PT44MW finishes?
If your Beko Washer laundry remains wet at the end of the program, it's possible that excessive foam has occurred due to too much detergent usage. Use the recommended amount of detergent to prevent this issue.
What to do if my Beko WY124PT44MW Washer programme won't start or select?
If your Beko Washer programme cannot be started or selected, the product may have switched to self-protection mode due to a supply problem such as line voltage or water pressure issues. To reset the product to factory settings, press and hold the On/Off button for 3 seconds.
Why is there detergent residue in my Beko WY124PT44MW Washer detergent drawer?
If you see detergent residue in the detergent drawer of your Beko Washer, it could be due to several reasons. The detergent drawer may have been wet when the detergent was added, so dry it before putting in detergent. The detergent itself might have gotten damp, so keep detergents closed in a humidity-free environment. Low water pressure can also be a factor, so check the water pressure. Check the holes of the detergent compartment are blocked. Do not mix the softener with detergent. Wash and clean the drawer with hot water. Regular drum cleaning is not applied. Clean the drum regularly.
Why did the colors of my clothes fade after washing in my Beko Washer?
If the colour of the clothes faded after washing in your Beko Washer, excessive laundry may have been loaded. Do not load the product in excess. Also, the detergent in use may be damp, so keep detergents closed in a humidity-free environment and do not expose them to excessive temperatures. A higher temperature may have been selected, so select the proper program and temperature according to the laundry type.
Why doesn't my laundry smell like softener after using my Beko Washer?
If your Beko Washer laundry does not smell like the softener, it may be because the detergent was put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, the product can take this detergent during rinsing or softener step. Wash and clean the drawer with hot water and put the detergent in the correct compartment. Also, make sure that the detergent was not mixed with the softener. Do not mix the softener with detergent. Wash and clean the drawer with hot water.
Why are my clothes stiff after washing in my Beko WY124PT44MW Washer?
If your Beko Washer laundry became stiff after washing, it could be because an insufficient amount of detergent was used for the water hardness. Make sure you are using the appropriate amount of detergent according to the water hardness. Also, check if the detergent was put in the wrong compartment or mixed with the softener; avoid mixing and ensure correct compartment usage.
Why doesn't my Beko WY124PT44MW rinse properly?
If your Beko Washer washing machine does not rinse well, the issue might be related to the detergent. Make sure you are using a detergent appropriate for the washing machine and your laundry and that you are storing it correctly. Also, make sure the detergent was put in the correct compartment. Check the pump filter and the drain hose for any blockages.
General| Type | Front Load |
|---|---|
| Capacity | 12 kg |
| Spin Speed | 1400 RPM |
| Energy Efficiency Class | A+++ |
| Color | White |
To Next Page
