Need help?Do you have a question about the Belanger SABER SL-2 and is the answer not in the manual?
Displays the ten packages in queue for wash, or zero if none present.
Shows package accumulation since last reset or midnight.
Navigates to Force, Jog, Monitor Inputs/Outputs, and About screens.
Introduces the system's fault status display and error codes.
Explains the touch-screen technology and its operation.
Details how to navigate screens and use toggles and numeric inputs.
Covers selections and alpha/numeric data entry screens.
Overview of setup options and configuring wash packages.
Customizes application parameters like fill, dwell, and purge times.
Configures conditions for vehicle entry sequences and functions.
Configures conditions for vehicle exit sequences and functions.
Manages automatic door operation based on temperature and time.
Sets up how sales inputs are processed by the system.
Configures pager numbers and message settings for fault alerts.
Adjusts password, weep mode, temperature scale, and sonar.
Accesses application configuration and output naming.
Configures named and miscellaneous outputs for wash applications.
Assigns custom names to system outputs for improved clarity.
Provides practical examples of setting up wash packages.
Guides on configuring sonar modes and parameters, including changing settings.
Lists fault codes, their names, and detailed explanations.
Explains common faults like Low Air, Carriage Jam, GFCI, and E-Stop.
Lists VFD drive codes and their corresponding alarm descriptions.
Details dip switch settings and initial network screen setup.
Navigates through network settings like TCP/IP, Accounts, and Services.
Configures the system to send email alerts for faults and reports.
Configures remote access to the system via web browser or VNC.
Displays the ten packages in queue for wash, or zero if none present.
Shows package accumulation since last reset or midnight.
Navigates to Force, Jog, Monitor Inputs/Outputs, and About screens.
Introduces the system's fault status display and error codes.
Explains the touch-screen technology and its operation.
Details how to navigate screens and use toggles and numeric inputs.
Covers selections and alpha/numeric data entry screens.
Overview of setup options and configuring wash packages.
Customizes application parameters like fill, dwell, and purge times.
Configures conditions for vehicle entry sequences and functions.
Configures conditions for vehicle exit sequences and functions.
Manages automatic door operation based on temperature and time.
Sets up how sales inputs are processed by the system.
Configures pager numbers and message settings for fault alerts.
Adjusts password, weep mode, temperature scale, and sonar.
Accesses application configuration and output naming.
Configures named and miscellaneous outputs for wash applications.
Assigns custom names to system outputs for improved clarity.
Provides practical examples of setting up wash packages.
Guides on configuring sonar modes and parameters, including changing settings.
Lists fault codes, their names, and detailed explanations.
Explains common faults like Low Air, Carriage Jam, GFCI, and E-Stop.
Lists VFD drive codes and their corresponding alarm descriptions.
Details dip switch settings and initial network screen setup.
Navigates through network settings like TCP/IP, Accounts, and Services.
Configures the system to send email alerts for faults and reports.
Configures remote access to the system via web browser or VNC.
General| Model | SABER SL-2 |
|---|---|
| Manufacturer | Belanger |
| Category | Industrial Equipment |
| Wash Type | Touchless |
| Vehicle Types | Cars, SUVs |
| Control System | PLC-based |
| Power Requirements | 480V, 3-phase, 60Hz |
| Water Usage | Approximately 30-40 gallons per wash |
| Dimensions | Varies based on configuration |
| Weight | Varies based on configuration |
| Material | Stainless Steel |
| Optional Features | Undercarriage wash |
| Warranty | 1-year limited warranty |
To Next Page
