4
Installation MS20/MS30
Release
14
03/2023
2.5 Adjusting the DIP switch settings on the basic module (4-pin
DIP switch) 49
2.6 Adjusting the DIP switch settings on the MS20/MS30-...E...
basic module (3-pin DIP switch) 51
2.7 Adjusting the DIP switch settings on the
MM20-A8A89999SAHH media module 53
2.8 Connecting the MM22-T1T1T1T1 PoE media module 53
2.9 Terminal block for supply voltage and signal contact 54
2.9.1 Supply voltage 55
2.9.2 Signal contacts 55
2.10 Connecting the terminal blocks, start-up procedure 55
2.10.1 Terminal blocks on MS20/MS30-...A... and MS20/
MS30-...C... 56
2.10.2 Terminal block on MS20/MS30-...E... 57
2.10.3 Operating the device 57
2.11 Installing and grounding the device 58
2.11.1 Installing the device onto the DIN rail 58
2.11.2 Grounding the device 59
2.12 Connecting data cables 59
2.12.1 Twisted Pair ports 59
2.12.2 Optical fiber ports 60
2.13 Assembly of the MB20 extender module 60
2.14 Defining the meaning of the display LEDs 60
3 Making basic settings 61
3.1 First login (Password change) 63
4 Maintenance and service 64
5Disassembly 65
5.1 Removing the device 65
5.2 Removing an SFP transceiver (optional) 66
6 Technical data 67
A Further support 89
To Next Page
Loading...
