How to get adequate pain relief using Belifu SM9126 Massager?
For adequate pain relief with your Belifu Massager, use it for 20-30 minutes at a time, 3-6 times per day. If you need relief for headaches or neck pain, lie on your back for neck support during the massage.
What to do if Belifu SM9126 Massager unit does not turn on or the screen is dim?
If your Belifu Massager unit doesn't turn on or the screen is dim, the battery is likely low. Recharge the battery to resolve this issue.
Why no sensation is felt in the pads of Belifu SM9126 Massager?
If you are using your Belifu Massager and no sensation is felt in the pads, ensure both pads are firmly pressed to the skin. Also, check that all connections are secure from the unit to the wires and the wires to the pads. If needed, increase the intensity level.
What to do if Belifu Massager adhesive gel pads do not stick to skin?
If the adhesive gel pads of your Belifu Massager do not stick to the skin even after cleaning and moistening, it means the adhesive gel pads need to be replaced. Purchase a new set of pads from your local distributor.
Why does Belifu SM9126 Massager cause a burning sensation on the skin?
If you experience a painful burning sensation or weakened stimulation during a massage with your Belifu Massager, it may be because the adhesive gel pads are not adhering firmly to the skin or the gel pads are too dry. To fix this, apply a few drops of water to the adhesive surface of each pad and make sure the pads are pressed firmly to the skin during application.
To Next Page
General
