TEMP. IND &
REG. EQUIP.
● Cut labor costs with (10 min. installation) simple direct coupling.
Actuator Centers on 1/2” shaft (K6-1, 3/4” clamp optional).
● True mechanical spring return – the most reliable failsafe.
● Mount for clockwise or counterclockwise fail-safe.
● Easy-to-adjust mechanical stop to limit damper rotation.
● Check damper position easily with clear position indicator.
● Don’t worry about actuator burn-out, it is overload-proof
throughout rotation.
● Need to change control direction?
Do it easily with a simple switch (modulating actuators).
● Built-in auxiliary switch is easy to use, offers feedback
or signal for additional device.
● Microprocessor-controlled brushless DC motor increases
actuator life span and reliability, provides constant running
time (modulating actuators).
● Rugged metal housing withstands rough handling in the
mechanical room.
● 3 ft. cable and conduit connector eases installation.
A CLOSER LOOK…
The Trane Difference
● Low Installation and Life-Cycle Cost.
Easy installation. Accuracy and repeatability.
Low power consumption. No maintenance.
●
Long Service Life.
Components tested before assembly. Every product tested before shipment.
30+ years direct coupled actuator design.
To Next Page
Loading...
