UNPACKING
Carefully lift the monitor out of the packaging and make
Save the original box and packing material in case you
have to ship or transport the monitor.
together.
Figure 1. LCD Monitor
Power cord
VGA cable
To connect the monitor to your PC ........................
1. Make sure that the PC and monitor are unplugged.
2. Connect the 15-pin signal cable to the PC (see
CONNECTING
To connect the monitor to the power source ........
Connect the separate power cable (
monitor and a grounded outlet.
1. First start your PC and then turn on your Belinea
monitor using the power switch (
power indicator (
2.
3. If there is no image displayed on the monitor, consult
STARTUP
1
Signal cable
Figure 2. Connecting the monitor to the PC
Figure 3. Connecting the monitor to the power source
To Next Page
Loading...
Need help?
General
