Belkin 4-Port USB 2.0 Hub - Introduction

Congratulations and thank you for purchasing the Belkin
4-Port USB 2.0 Hub (the Hub). The Hub provides four
downstream USB ports that are compatible with both USB
1.1 (low- and full-speed) devices, as well as with USB 2.0
(high-speed) devices.
This means that the Hub is “backward-compatible” with all of
your current USB 1.1 devices and also works with the next
generation of “high-speed” USB 2.0 devices. This may include
such peripherals as scanners, printers, mass-storage devices,
and high-resolution cameras. The Hub is self-powered, which
allows the cascading of devices with additional hubs, so that up
to 127 USB devices can be connected to a single port. The Hub
also provides a multicolored status LED for each individual port,
and a master power LED that indicates the Hub is powered and
ready to use. For additional information, refer to the “Technical
Specifications” section.
Introduction
En
1
Please read this manual thoroughly and follow the
procedures to prevent any damage to the 4-Port
USB 2.0 Hub and/or to the connected devices.
P73889ea-B_F5U221_man_5-02.qxd 10-10-2003 17:06 Page 1