Need help?Do you have a question about the Belkin OmniView and is the answer not in the manual?
General| Connectivity | Wired |
|---|---|
| Hot-Key Switching | Yes |
| Type | KVM |
| Ports | 4 |
| Compatibility | PC, Mac |
| Connectors | VGA, USB, PS/2 |
| Operating System Support | Windows, Mac, Linux |
Introduces the Belkin OmniView Remote IP Manager and lists its package contents.
Details the key features and capabilities of the RIPM, such as remote access and virtual media.
Lists the necessary hardware components for installing and operating the RIPM.
Specifies compatible operating systems and web browsers for the RIPM.
Provides detailed technical specifications including part number, power, and resolution.
Illustrates the physical layout of the RIPM's front and back panels.
Shows typical RIPM configurations with computers and KVM switches.
Guides on mounting the RIPM in a rack and connecting peripherals.
Details connecting the RIPM to KVM switches or computers.
Connects the Mini-USB for virtual media and powers on the device.
Explains setup via software CD or serial interface, recommending software.
Step-by-step guide for installing the device setup software.
Details serial port settings and commands for configuration.
How to access the RIPM via web browser or Telnet.
Procedure for accessing the RIPM login page via web browser.
Overview of the Remote Console interface and its basic functions.
Settings for interface types, keyboard, and mouse behavior.
Explains Auto Mouse Speed, Fast Sync, and Intelligent Sync.
Addresses OS-specific mouse settings and potential synchronization issues.
Provides optimal mouse settings for different operating systems.
Describes how to navigate within the RIPM's web interface.
Details the control bar elements like Auto-Adjust, Sync Mouse, and Options.
Covers scaling, mouse handling, and synchronization methods.
Explains local cursor selection and video settings panel.
Detailed adjustments for video parameters like brightness and contrast.
Enables and configures the soft keyboard for language mapping.
Manages local keyboard language and defines hot keys for commands.
Displays connection status, traffic, and exclusive access settings.
Configures the monitor-only filter for passive viewing.
Procedures for resetting to factory defaults and logging out.
Provides access to KVM and Telnet consoles for remote management.
Lists available commands for managing the RIPM via Telnet.
Enables uploading and emulating floppy disk images.
Instructions for mounting CD-ROM images using Windows Share.
Steps using drive-redirection software to upload CD-ROM images.
Completes CD-ROM image upload and makes it available as a USB device.
Allows redirection of local drives to the remote computer.
Details parameters for drive redirection, including write support.
Covers connecting, disconnecting, and options for drive redirection.
Methods for creating floppy images on UNIX and Windows.
Methods for creating CD-ROM/ISO images on UNIX and Windows.
Procedure for changing the user password.
Managing administrator and user accounts, roles, and limitations.
Configures user-specific remote console and transmission encoding.
Selects JVM and configures miscellaneous console settings.
Defines custom button keys for simulating keystrokes.
Configures host interface, PS/2 keyboard model, and USB mouse type.
Adjusts mouse speed settings for synchronization.
Manages video settings, including noise filter and custom modes.
Details custom video parameters and KVM port assignment.
Configures IP address, subnet mask, gateway, and DNS servers.
Sets ports for services, bandwidth limit, and Telnet access.
Explains the scenario for using Dynamic DNS for remote access.
Sets up Dynamic DNS server, host name, and credentials.
Configures encryption and IP-access control.
Manages IP rules and blocks users after failed login attempts.
Process for generating and installing an SSL certificate.
Details required fields for SSL certificate generation.
Configures serial port for console login and modem settings.
Sets modem IP addresses and serial pass-through via Telnet.
Configures Intelligent Platform Management Interface (IPMI) settings.
Sets the device's internal clock manually or via NTP server.
Configures LDAP server details for centralized authentication.
Details LDAP user filters and RADIUS server configuration.
Configures RADIUS accounting port, timeout, and retries.
Configures event log targets, including internal and NFS logging.
Sets up SNMP logging and selects which events to log.
Displays RIPM information, firmware version, and connected user activity.
Provides a list of logged events with dates and IP origins.
Step-by-step guide for updating the RIPM's firmware.
Procedures for resetting specific parts or the entire RIPM device.
Addresses issues with mouse synchronization and video quality.
Solves web page display, console black screen, and sync problems.
Procedure to reset the RIPM to factory defaults if the password is lost.
Details FCC, CE, ICES compliance and the 2-year product warranty.
Explains warranty exclusions and how to obtain service.
Provides contact details for Belkin technical support and regional offices.
To Next Page
