Fig. 3
3.1 Power down the KVM switch.
3.2 Using the provided PS/2 and VGA
cable kit, connect one end to
the “CPU/KVM switch” monitor,
keyboard, and mouse ports on
the RIPM. See Fig. 3.
3.3 Connect the other end to the
monitor, keyboard, and mouse
ports on your KVM switch.
.
Step 3 Option 2: Connecting the RIPM to a Computer
(Host System)
Fig. 4
3.1 Power down the computer.
3.2 Using the provided PS/2 and
VGA cables, connect one end to
the “CPU/KVM switch” monitor,
keyboard, and mouse ports on
the RIPM. See Fig. 4.
3.3 Connect the other end to the
monitor, keyboard, and mouse
ports on your computer.
To Next Page
Loading...
