1
2
3
4
5
6
section
28
3-4 Remote Console Control Bar The Remote Console
Local Keyboard
Used to change the language mapping of your browser machine running the
Remote Console applet. Normally, the applet automatically determines the
correct value. However, depending on your particular JVM and your browser
settings, this is not always possible. A typical example is a German localized
system that uses a US-English keyboard mapping. In this case, you must
manually adjust the local-keyboard setting to the correct language.
Hot Keys
Opens a list of predefined hot keys. Choose one entry and the command will be
sent to the host system. You can add a confirmation dialog that will be displayed
before the selected command is sent to the remote host. Select “OK” to perform
the command on the remote host.
To Next Page
Loading...
