To Next PageTo Next Page
Need help?Do you have a question about the Belkin BOOST UP and is the answer not in the manual?
The Belkin BOOSTUP Wireless Charging Pad comes with a 2-year limited warranty, extendable to 3 years with registration.
The pad charges at 7.5 watts and works effectively through most cases up to 3 mm thick.
Compatible with iPhone X, 8 Plus, 8, and all Qi-certified devices and accessories.
Can only charge one phone at a time and is not designed for use in a car.
Indicates charging status: Blinking Green (charging), Solid Green (fully charged), Red (error).
The LED indicator cannot be turned off.
The charging pad measures 4.56" (11.6cm) in diameter and 0.53" (1.3cm) tall.
Features a heat-efficient, fan-free design to keep the charger cool.
Requires the device to be plugged in to charge; input 15V/1.5A/22.5W.
Includes a large rubber bottom for stability and surge protection capabilities.
The product includes a Connected Equipment Warranty up to $2500.
Includes the wireless charging pad and one power supply unit.
Operates between 0°C to 40°C and stores between -40°C to 80°C.
The phone and wireless charger communicate to manage charging at 100%.
Can be cleaned using standard electrical cleaning spray.
The Belkin BOOSTUP Wireless Charging Pad comes with a 2-year limited warranty, extendable to 3 years with registration.
The pad charges at 7.5 watts and works effectively through most cases up to 3 mm thick.
Compatible with iPhone X, 8 Plus, 8, and all Qi-certified devices and accessories.
Can only charge one phone at a time and is not designed for use in a car.
Indicates charging status: Blinking Green (charging), Solid Green (fully charged), Red (error).
The LED indicator cannot be turned off.
The charging pad measures 4.56" (11.6cm) in diameter and 0.53" (1.3cm) tall.
Features a heat-efficient, fan-free design to keep the charger cool.
Requires the device to be plugged in to charge; input 15V/1.5A/22.5W.
Includes a large rubber bottom for stability and surge protection capabilities.
The product includes a Connected Equipment Warranty up to $2500.
Includes the wireless charging pad and one power supply unit.
Operates between 0°C to 40°C and stores between -40°C to 80°C.
The phone and wireless charger communicate to manage charging at 100%.
Can be cleaned using standard electrical cleaning spray.
The Belkin BOOST↑UP™ Wireless Charging Pad (F7U027) is designed to provide convenient wireless charging for compatible devices, specifically the iPhone X, iPhone 8 Plus, and iPhone 8, as well as other Qi-certified devices and accessories. This charging pad offers a straightforward and efficient way to power up your smartphone without the need for cables directly connected to the device itself.
The primary function of the Belkin BOOST↑UP™ Wireless Charging Pad is to wirelessly charge compatible smartphones and accessories. It utilizes the Qi wireless charging standard, which is widely adopted across many modern devices. When a compatible device is placed on the pad, it initiates charging at a rate of 7.5 watts for the specified iPhone models. The pad is designed to work effectively even with most phone cases, accommodating thicknesses up to 3 mm, which means you typically won't need to remove your phone's protective cover to charge it.
An intelligent charging system is integrated into the pad. This means that the phone and the wireless charger communicate with each other. This communication allows the charger to understand when the phone has reached a full charge (100%) and to stop charging accordingly, preventing overcharging and potentially extending the battery life of your device.
The charging pad features an LED indicator that provides visual feedback on its operational status. A blinking green light signifies that a device is currently charging, while a solid green light indicates that the device is fully charged. If the LED turns red, it alerts the user to a non-compatible device being placed on the pad or a misaligned device, prompting them to adjust its position for proper charging. This visual cue system helps users quickly understand the charging status and troubleshoot any issues.
The design of the BOOST↑UP™ Wireless Charging Pad prioritizes heat efficiency. It operates without a cooling fan, relying on its inherent design to dissipate heat and keep the charger cool during operation. This fan-free design contributes to a quiet charging experience, free from the noise associated with active cooling components.
Using the Belkin BOOST↑UP™ Wireless Charging Pad is designed to be simple and intuitive. To begin charging, the pad must be plugged into a power source using the included power supply unit. Once connected, you simply place your compatible smartphone or accessory onto the pad. The large circular rubber bottom of the pad helps to keep it securely in place on surfaces, preventing accidental movement or slippage during use.
The pad is capable of charging one device at a time. While it is highly convenient for personal use at home or in the office, it is not designed for simultaneous multi-device charging. It is important to ensure that your device is Qi-certified to guarantee compatibility and optimal performance. If you are unsure about your device's compatibility, it is recommended to check with your phone or accessory manufacturer or wireless carrier.
The device is intended for indoor use and is not suitable for use in a car. Its design and power requirements are tailored for stationary environments where it can be connected to a standard electrical outlet.
The LED indicator is a key usage feature, providing immediate feedback. If the LED is red, you should check if your device is compatible or simply reposition it on the pad to ensure proper alignment. The pad's ability to charge through most cases up to 3 mm thick enhances user convenience, as it eliminates the repetitive action of removing and reattaching phone cases.
The product comes with a 2-year limited warranty, which can be extended to 3 years upon product registration. This provides users with peace of mind regarding the device's reliability and manufacturer support. Additionally, the BOOST↑UP™ Wireless Charging Pad includes a Connected Equipment Warranty (CEW) of $2500, offering further protection for equipment connected to the charger in the event of damage due to electrical surge.
Maintaining the Belkin BOOST↑UP™ Wireless Charging Pad is straightforward. For cleaning, a standard electrical cleaning spray can be used. This allows for easy removal of dust, smudges, or other surface contaminants, helping to keep the pad looking clean and functioning optimally. Regular, gentle cleaning will help preserve the aesthetic and functional integrity of the device over time.
The fan-free design of the charging pad means there are no internal moving parts like fans that would require cleaning or maintenance, simplifying its upkeep. The robust construction, including the rubberized base, is designed for durability and stability, reducing the need for frequent adjustments or repairs.
The intelligent charging feature, which stops charging once a device reaches 100%, contributes to the longevity of both the charger and the connected device by preventing unnecessary continuous power flow. This smart functionality is a passive maintenance feature that helps protect your electronics.
The recommended operating temperature range for the pad is 0°C to 40°C, and the storage temperature range is -40°C to 80°C. Adhering to these environmental guidelines will help ensure the long-term performance and reliability of the device. Storing and operating the pad within these ranges prevents potential damage from extreme temperatures.
General| Type | Wireless Charger |
|---|---|
| Compatibility | Qi-enabled devices |
| Brand | Belkin |
| Color | White |
| Model | BOOST UP |
| LED Indicator | Yes |
| Material | Plastic |
| Output Power | 10W |
